Official GIGABYTE Forum

GA-P67A-UD3-B3 and RAM issues

GA-P67A-UD3-B3 and RAM issues
« on: May 23, 2011, 09:36:32 pm »
Hi.
About 1 month ago I bought some new components for my desktop PC.
I got 1 GIGABYTE GA-P67A-UD3, 4x4GB Corsair Vengeance in 1 kit CMZ16GX3M4A1600C9B and an Intel i5-2500.

I'm having problems of stability with my system under Windows 7 Ultimate 64bit.

Until now I had 1 BSOD (memory_management) and several corrupted files downloaded from http, ftp etc.

I scanned my memory with memtest 4 for Windows with the result that I had a lot of errors.
Then I tryied at the boot with memtest86 4.00 and memtest86+ 4.20 with no errors (more than 10 passes).

I sent memory in RMA to the shop who sold the kit to me. I got a new kit, but the problem remains.

I tryied everything :

- BIOS update from F2 to F4
- Clear the cmos more than one time
- XMP @default (1333MHz) and Profile1 (1600Mhz)
- VTT from 1,05V to 1,10, then and other steps
- DDR Voltage from 1.5V till 1.65V
- Disable USB Legacy (as suggested in other forums)
- Windows 7 is fully updated
- Video card drivers (RADEON HD5770) are updated
- All Gigabyte drivers are installed
- Easytune 6 (latest version) is running at default
- The machine is not in OC or in turbo mode.

I don't really know how to fix it.

Because it's not a RAM problem (as I said, I've changed the kit with a new one), I would like to ask to you if there are known compatibility problems with the Corsair kit. The corrupted files problem is driving me mad.

Can you please help me? :(

(forgive me for my english)

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-P67A-UD3-B3 and RAM issues
« Reply #1 on: May 23, 2011, 10:19:12 pm »
Hi and welcome to the Gigabyte Forum.

It is a memory problem but not in the way you are thinking. You have tried unsuccessfully to use the XMP setting and Auto in the BIOS. This won't work as you have filled all the slots and so the memory controller(on the CPU) needs more voltage to compensate. Try manually entering all the settings for the memory in the BIOS instead. As I mentioed you will probably also need to increase the DRAM voltage a touch.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: GA-P67A-UD3-B3 and RAM issues
« Reply #2 on: May 23, 2011, 11:06:28 pm »
And do you think I can solve it doing this?

Please... I'm a little bit dumb with these kind of setting. Could you please tell me what I have to change? I don't really know how to start. Thank you a lot. I hope I can solve the problem with your help :)

Re: GA-P67A-UD3-B3 and RAM issues
« Reply #3 on: May 24, 2011, 01:46:03 pm »
I've done everything you said, but it doesn't work.

I set all in manual mode and I changed (step by step) all the V value.

VCORE from 1,205 to 1,250
VTT from 1,050 to 1,150
System Ageng Voltage from 0,920 to 0,971
DRAM Voltage from 1,50 to 1,65
DRAM Freq from 1333 to 1600.

System remains unstable with all the module placed in their slot.

No problem with 2 module in DDR3_1 and DDR3_3 or 3 module in DDR3_1, 2 and 3 even at 1600MHz and default voltages.