Hi All,
Just bought a replacement mobo and installed it, unfortunately I cannot get the mobo to boot, I get the following responses:
1) Power comes on
2) LED's light up next to CPU
3) CPU fans, system fans and powers supply fans all running
4) All front panel lights flashing
5) No beeps, small speaker installed
6) No display output
7) Tried without graphics card, and using internal graphics interface - no luck!
I have tried all the usual suggestions as suggested on this forum, cleared CMOS, tried without any attachments, changed memory
checked power supply, displays, reseating chip etc...but no luck.
Can anyone help, I have the following configuration:
1) Intel Q6600 processor
2) Nvidia Quodro NVS 440 Graphics card ( also tried with other graphic cards - so faulty card ruled out)
3) Kingston DDR3 240 pin 2GB memory modules x 4 (total 8GB) - (tried also with 1 x memory)
4) Windows XP 32 bit
5) 4 x Dell monitors (all working fine on other PC)
6) 600W power supply (tested on another PC and working)
Any help would be much appreciated!
PP