Swapped out motherboard/CPU/RAM from an ASUS P5Q-E on an existing gigabit network. Problem is even after two windows installations I am only getting a 10MB network connection from the UD4 board. Using a CAT6 cable that was previously working to a gigabit switch which is fed to a Dlink 655 router. I tried using the drivers from the included CD and also the newer ones on gigabyte's site. If I view in task manager network tab it shows 10MB and I can't speed test higher than that on my 25MB comcast connection. I changed the advanced settings in device manager from autonegotiate to 1GB/Full but no change.
Windows 7 x64 SP1
2600K, F4 Bios, 16GB Corsair memory kit, not overclocked (yet)
Any ideas?