Official GIGABYTE Forum

Z68XP-UD4 10MB Network Speed

Z68XP-UD4 10MB Network Speed
« on: September 12, 2011, 01:56:39 am »
Swapped out motherboard/CPU/RAM from an ASUS P5Q-E on an existing gigabit network.  Problem is even after two windows installations I am only getting a 10MB network connection from the UD4 board.  Using a CAT6 cable that was previously working to a gigabit switch which is fed to a Dlink 655 router.  I tried using the drivers from the included CD and also the newer ones on gigabyte's site.  If I view in task manager network tab it shows 10MB and I can't speed test higher than that on my 25MB comcast connection.  I changed the advanced settings in device manager from autonegotiate to 1GB/Full but no change.

Windows 7 x64 SP1
2600K, F4 Bios, 16GB Corsair memory kit, not overclocked (yet)

Any ideas?
« Last Edit: September 12, 2011, 01:58:44 am by ronnyb29 »

Re: Z68XP-UD4 10MB Network Speed
« Reply #1 on: September 12, 2011, 02:19:34 am »
OK in the bios and did the LAN test and it came back with 10mb and an incorrect cable length.  That should remove the Windows driver from the possible issues and sounds like a physical motherboard issue.  I also tried 2 additional cables that connect with 1GB speeds to my laptop.  I also tried connecting directly to both my gigabit router and my gigabit switch with no luck.  I guess i'll be returning this board tomorrow :(

TigetLi

  • 41
  • 9
Re: Z68XP-UD4 10MB Network Speed
« Reply #2 on: September 12, 2011, 05:18:36 am »
Hello Ronny,

Suggest you first try to use "ARP Offload" in the Advance Property of your controller.

If this does not solve your problem then follow this link to a thread similar to this one that suggest to to disconnect the power for 3 to 10 Minutes to fix your LAN speed problem. http://www.w7forums.com/realtek-onboard-lan-doesnt-work-above-10-mbps-t9501.html

Good luck,
« Last Edit: September 12, 2011, 05:19:45 am by TigetLi »
Windows7 Ultimate SP1 - 64bit
i7-2600K-D2 @ 4.5G-1.37V, Cooler – Corsair H70
Gigabyte P67A-UD7 B3 – BIOS F5
8GB Gskill F3-17000CL9D-8GBXLD@ 2133 9-11-9-28-2T-1.65V
Power Color Radeon 6990 @ 880x1250 MHz
Corsair 1000 W
LianLi Armor Suit PC-80
Creative Audigy 2Z Card
WD Raptor 600K, Samsung F3

Re: Z68XP-UD4 10MB Network Speed
« Reply #3 on: September 12, 2011, 06:30:19 am »
I'll be damned but that worked.  Unplugged for about 10 minutes and back to 1GB.  I appreciate it.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Z68XP-UD4 10MB Network Speed
« Reply #4 on: September 12, 2011, 06:59:53 am »
Hi

A long reboot is always the first thing to try with any equiptment that is playing up like that. Good advice from TigetLi
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: Z68XP-UD4 10MB Network Speed
« Reply #5 on: September 12, 2011, 05:18:10 pm »
OK this morning after a few reboots and playing with OSX86 I'm back to 10MB.  I don't really want to have to unplug my computer for 10 minutes everday.  Is this normal for these boards or should I return it while it's new?


Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Z68XP-UD4 10MB Network Speed
« Reply #6 on: September 12, 2011, 05:33:42 pm »
I am not familiar with OSX so I don't know if it could be something to do with that OS. Does it do the same thing with only Windows installed ?
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

TigetLi

  • 41
  • 9
Re: Z68XP-UD4 10MB Network Speed
« Reply #7 on: September 13, 2011, 08:40:07 am »
Ronny,

If you have not done so already call the support section of your ISP and request their assistance with your problem. Try to call while your system has dropped down to 10Mb with your computer online and you at the keyboard. The tech should be able to test your line and guide you through re-setting your connection. Keep your system set up simple so that you get their full cooperation. Most of these techs are very knowledgeable and helpful. Cost you nothing to try and you might just get lucky.

Good luck,
Windows7 Ultimate SP1 - 64bit
i7-2600K-D2 @ 4.5G-1.37V, Cooler – Corsair H70
Gigabyte P67A-UD7 B3 – BIOS F5
8GB Gskill F3-17000CL9D-8GBXLD@ 2133 9-11-9-28-2T-1.65V
Power Color Radeon 6990 @ 880x1250 MHz
Corsair 1000 W
LianLi Armor Suit PC-80
Creative Audigy 2Z Card
WD Raptor 600K, Samsung F3