Official GIGABYTE Forum

should i use ide or achi on a new a new l1155, z68 board non raid

i am looking to find out if i can switch to achi while building a new system during bios setup, and if so do i have to make any changes say in the registry or not?


                                                                                                                                              thanks.


                                                                                                                                               dave                                                                                                                                               

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: should i use ide or achi on a new a new l1155, z68 board non raid
« Reply #1 on: August 31, 2011, 09:18:24 pm »
Hi

If you just want to know if you can select AHCI mode before installing Windows then yes there is no problem at all.

If on the other hand:

If you are asking if you can swap over to AHCI mode after installing Windows in IDE mode then the answer is yes but you will have to do some registry hacking.

1.Exit all Windows-based programs.

2.Click Start, type regedit in the Start Search box, and then press ENTER.

3.If you receive the User Account Control dialog box, click Continue.

4.Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci

5.In the right pane, right-click Start in the Name column, and then click Modify.

6.In the Value data box, type 0, and then click OK.

7.On the File menu, click Exit to close Registry Editor.

Afterwards go into the BIOS and select AHCI mode instead of IDE mode. save and exit(F10) and reboot.
« Last Edit: August 31, 2011, 09:19:49 pm by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: should i use ide or achi on a new a new l1155, z68 board non raid
« Reply #2 on: August 31, 2011, 09:40:32 pm »
thanks mantis

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: should i use ide or achi on a new a new l1155, z68 board non raid
« Reply #3 on: August 31, 2011, 09:56:19 pm »
Hopefully you will be fine now but if you have any more problems just shout. ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy