Official GIGABYTE Forum

GA-EP35-DS3L

GA-EP35-DS3L
« on: November 02, 2011, 04:52:49 pm »
Hello eveybody;
I have this motherboard from some time ago and it was working fine but since 2 days ago the system doesn't boot.
When I just press the power buttom the motherboard make a single beep and all seems to run ok but the system does'nt boot up.

Any help will appreciated. Thank you.

P.D. I apologize for my bad english.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-EP35-DS3L
« Reply #1 on: November 03, 2011, 07:06:32 am »
Hi and welcome.

I take it from what you say that the system doesn't boot but gives the POST completed beep that it is just that you can't see anything on the display, is that right ?

If so I would check all your monitor connections and power lead. If possible even swap it for a different monitor.

Make sure that the graphics card's fan is runing and the power supply cable is still firmly attached.

It would help if you listed the components in your machine also.
« Last Edit: November 03, 2011, 07:07:23 am by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: GA-EP35-DS3L
« Reply #2 on: November 03, 2011, 09:14:26 am »
He and thank you for your answer;
When I say a beep, it's not the POST beep, this beep is as soon as I press the power buttom.
I've checked everything, diferent memories, several graphic cards even an old PCI one and I changed even the power supply.

Thank you.