Official GIGABYTE Forum

GA-X58A-UD5 Rev2 and new RAM to add

GA-X58A-UD5 Rev2 and new RAM to add
« on: November 06, 2011, 10:36:50 am »
Hi all,I have to increase the RAM amount from 6 GB to 12. I have installed since I built my pc the following OCZ kit OCZ3P1600LV6GK.This kit isn't anymore available at my usual shops so I want to ask you if the following kit won't give me any problems (in combination with the OCZ one) : CMP6GX3M3A1600C7 (Corsair 6GB Kit 3*2GB DDR3-1600 PC3-12800 DHX Dominator CAS7).I know it would be better to buy a 12 GB kit but what would I do with my actual kit ?
Lastly : does eventually a 12 GB RAM kit (at 1,65 volts) will have some issues on my CPU (I7 950 3.02 GHZ) ?

Thanks to anybody who will answer !!!!!

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-X58A-UD5 Rev2 and new RAM to add
« Reply #1 on: November 06, 2011, 08:00:11 pm »
Hi and welcome.

I am afraid the bad news is that although it is possible the chances are that any different memory modules you add to your existing ones will not play ball. Sometimes even the same kits can be a problem to get working together let alone different ones. Your best course of action would be to sell your present RAM and buy a full matched kit of six modules or even a kit of three 4GB modules which would give you the same 12GB total. ;)

1.65v is fine with your system.
« Last Edit: November 06, 2011, 08:01:25 pm by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Aussie Allan

  • 1964
  • 141
  • A yoyo uses all three fundermental laws of phisics
Re: GA-X58A-UD5 Rev2 and new RAM to add
« Reply #2 on: November 06, 2011, 08:41:23 pm »


  agreed I'm afraid.....it's not impossible, but how would you feel forking out for modules that don't end up working ....then you have 2 sets to dispose of.......Aria or scan have some amazing prices for 12Gb kits......start at about £80 for a matched kit

  Aussie Allan
i7-4790K @4.8GHz 24/7 water clock
MSI XPower AC
32GB corsair  2666Mhz
 GTX-1070Ti full cover
Lange DDC elite pump
G changer360 Rad x2
Phobya 450 balancer
W10 Pro-64
Zigor 2000 UPS
1x500GB for clone
6x2tb- raid5-Storage
C: Evo 970 Pro 512gb
Scratch:Evo 970 Plus 512gb

Tinker

  • 139
  • 6
Re: GA-X58A-UD5 Rev2 and new RAM to add
« Reply #3 on: November 06, 2011, 10:32:47 pm »
I was lucky & picked up 3x4gb Kingston 1600@1.65 v now running on XMP at around £69.00. Blew over a £100.00 on
6gb of OCZ last year that was wrong spec. On one of my PCs tried to run an identical pair ie two matched pairs & had
problems even though same make & spec.


Regards tinker.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-X58A-UD5 Rev2 and new RAM to add
« Reply #4 on: November 07, 2011, 07:51:42 am »
Yes this is the problem Tinker as I explained to the OP you cannot rely on even another kit of the same make and model working with the original memory. Usually it will but it's not a given.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: GA-X58A-UD5 Rev2 and new RAM to add
« Reply #5 on: November 08, 2011, 11:01:53 am »
Gentlemen,thanks for your answers.....I read that is better having a RAM kit with lower latency (staying in my case on  a 1600MHz kit) then having a 2000 MHZ kit with cas at 10 or more ? Is it correct ?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-X58A-UD5 Rev2 and new RAM to add
« Reply #6 on: November 08, 2011, 11:09:17 am »
The higher speed memory (2000) will be better if you are going after high overclocks but if you are sticking to the default speeds or thereabouts then it is better to have a memory with tighter timings. Usually tight timings will actuall result in more throughput than just sheer speed.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy