power surge on hub port on my board

[x1_SnowTiger_1x]

i keep geting a error saying there as been a power surge on hub port on my board and i get a option of reseting it what can course this the sysstem im haveing the problam is in my sig

[Dolphin_X]

Make sure you're running the latest BIOS and the latest version of the Renesas USB 3.0 drivers. Prior to upgrading my drivers, I had the same problem you described. Completely removing the old drivers and replacing them with the latest version resolved the problem.

[x1_SnowTiger_1x]

all the drivers are up to date but my bios is stil factory bios and i have no clue how to upgrade me current bios can you give me some help please

[x1_SnowTiger_1x]

just been doing some searchs online and im not up on updateing the bios with this board so ill take it to a shop and ask them do it for me cus i believe you can mess your board up if you do it wrong and i dont fancey busting this board cus it was exspensive at the time i got it

[Dark Mantis]

We do have a FAQ on the forum regarding this procedure but I can understand your reticence if you are not that familiar with the computer's hardware. It is probably just as well to take it to a local shop and get them to do it for you. If you would like to read the FAQ anyway, you can find it here:

http://forum.giga-byte.co.uk/index.php/topic,2441.0.html

[x1_SnowTiger_1x]

i managed to flash my bios now i cant get into the ctrl I screen now how to  get to it could u please tell me how to geto any replys u give menks t into that screen on the latist virsion of the bios tha

[x1_SnowTiger_1x]

i cant install windows i need some help please help if you can

[x1_SnowTiger_1x]

i have raid 0 on two drives and i select that drive and i get this error (setup was unable to create a new system partition or locate an exinting system partition see the seup log files for more info )

[Dark Mantis]

If You could slow down a little and try and write in English I will see what I can do to help. I need to know exactly what drives you have got they are not mentioned in your sig. and exactly what the state of play is on your system now.  

[x1_SnowTiger_1x]

iv got two ssd mushkin 120 gigs i usely raid 0 them and i have a 1 tb wd caviar black i dont get the ctrl i screen what i normaly get with this new bios usely i pressed them to get in the raid utity and raid 0 the 120 gigs im sorry if my spelling seams a little off the 120 gigs i put my os on and the 1tb i use for all my games

[Dark Mantis]

OK. Did you use QFlash to update the BIOS ?

Have you loaded Optimised BIOS Defaults after updating the BIOS before saving and exiting ?

Have you made sure that the drives are still on the same ports as before ?

Have you selected RAID as the mode for the SATA Control in the BIOS?

[x1_SnowTiger_1x]

iv loaded opyimised bios defaults and iv not switched the drives now the part about the selecting RAID as the mode for the sata control im not sure how to do that i really thank you for helping me

[Dark Mantis]

Go into the BIOS and find the page labelled Integrated Peripherals, look down the list and you will see PCH SATA Control Mode or something similar. Select that and one of the options is RAID so select that and then save and exit (F10).

Now when you press Control I to enter the RAID page it should be there.  

[x1_SnowTiger_1x]

iv got that option on RAID (XHD) and i still get no ctrl I on boot up