Marvell 91xx Config ATA Device GA-M68MT-S2 (rev 3.1)

[gc]

New build windows 7 64 bit. I have a yellow exclamation mark in device manager on Other Devices next to Marvell 91xx Config ATA Device. What is this? I am unable to find any drivers on the Gigabyte site to correct this. During bootup it shows a DVD attached to it.

[teknology9]

Hi gc and welcome to forum

Have you got the CD that came with your MB.....you might find it on there.


Teknology9

[gc]

Yes I have the CD and have installed everything on the CD and it did not resolve the issue.

[gc]

I found the proper drivers. They are at http://drivers.windows7download.com/win7-ecs-p55h-ak-v1-0-marvell-91xx-sata-6g-controller-driver-1-0-0-1039/download-ykhje.html. Turns out they are not for the Giagabyte MOBO but are for the Highpoint Rocket 620 SATA II Controller cards that I installed. The driver says it is for Intel but the set up file also includes AMD processors.
It fixed my problems and I can now see the drives attached to the Rocket 620 SATA II controllers during boot up. They had always shown up in file manager.

[teknology9]

Hi,

OK......that's good....problem solved.


Teknology9

[Dark Mantis]

They were showing that because the central processor of the card was a Marvell 9128 chip hence the Marvell 91xx prompt. 

[teknology9]

Listing full system spec would of helped.