Official GIGABYTE Forum

GA-X79-UD3 F9 and Blue Screen of Death issues - HELP

GA-X79-UD3 F9 and Blue Screen of Death issues - HELP
« on: March 23, 2012, 12:39:15 pm »
I have a new PC (5 days old) that will crash to the blue screen if I leave it alone for several hours.  It does not crash under heavy gaming use or just surfing (go figure).  No overclocking.  CPU is I7-3820, memory -Corsair Dominator 16gb 1866, drive is the OCZ Revo Drive Hybrid (PCI express model), Power supply is Corsair gold AX850, cooling is Corsair H100, video is EVGA GTX 560TI (no blurring issues per the other post), and a Corsair 650D case.

Left the PC on all night and this morning I could not wake it up so presumed it crashed again (monitor was dark).  Did a hard shut down and turned back on.  It failed the bios part and restarted itself several times failing each time until it gave me a multiple error message saying that either I had power issues or overclocking issues.  It offered me the option to set everythign to default levels.  I did and it rebooted.

Memory was reset to the 13333 level .... I set it back.  It rebooted fine as well.  I know it will crash again after several hours of doing nothing.

Any ideas on what I should do or what the source of this problem may be?   HELP please.

Lsdmeasap

  • 1166
  • 58
    • Gigabyte Support (TweakTown USA)
Re: GA-X79-UD3 F9 and Blue Screen of Death issues - HELP
« Reply #1 on: March 23, 2012, 04:45:58 pm »
What Vtt are you using, and what IMC voltage?   16GB is a lot, and those will need to be adjusted!   I actually adjusted them for stability with 8GB, and then recently installed 16GB for testing and had to adjust everything again.   I run 16GB of 1600MHz memory at 2333Mhz, so 16GB in itself is not an issue either, just have to find the right settings. :D

I'm using F9 BIOS too, so it's not a BIOS issue, you just need to find the right settings for your particular hardware.  I suggest NOT using XMP, set it all manually.

Try Vtt 1.14-1.2
IMC 1.16-1.24

Re: GA-X79-UD3 F9 and Blue Screen of Death issues - HELP
« Reply #2 on: March 23, 2012, 07:11:13 pm »
I am being told that the OCZ Hybrid drive beibng in a PCI express slot may be contributing as tech suport said the motherboard may be looking for a drive from a SATA input....

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-X79-UD3 F9 and Blue Screen of Death issues - HELP
« Reply #3 on: March 23, 2012, 07:25:22 pm »
Try disabling all the power saving settings and see if that stops the BSODs which seem to be happening when it's resting. Make sure that you disable the BIOS and Windows as well.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy