p55 UD3R help

[decrypter]

Hi there maybe someone on here can help me out

bought a new pc 

p55 ud3r mobo + 4 gig corsiar 2x2gb  CMX4GX3M2A1600C9

core i5 cpu

problem is after a while its like the motherboard shuts down  keyboard/mouse everything goes down  and the only way to get back is a reboot ?

any help would be appreciated   ty

questions are 1, is the ram compatable
question 2  im running f2 bios should i try f3 bios ?

ty

[R_N_B]

Hello and welcome.

First up make sure that you have your ram in the correct two slots. Some times when we are in a hurry to built our new system (ooo so shiny  ) it is easy to make slips like that. If you are not sure then look in the manual for the slot placement. The UD3R manual also recommends that you have the ram in two particular slots and not just in any dual channel slots if I recall correctly.

Right once that is sorted go into bios and set all at optimum settings and reboot. Download the latest bios and flash. If at all possible do not use the windows application, I know it works but I hear far to many horror stories about flashing in windows problems to trust it.

Once the flash is done then you should be good to go. Lets get to that point and thereafter we can tweak your system up to the spec of the ram - that good for you mate? 

[decrypter]

Hi n thanx  i had the ram in wrong places lol   had it in slot 1 - 2  and needed to be 1-3 

also updated to latest bios  f4    see how it goes 

thanx again m8

[decrypter]

Has gotten even worse      i think its faulty mobo or ram  will take to pc repair shop get them to take a look

[ETNiES]

Before you take it to the repair shop, download memtest86 and run it on your ram, this will tell you if you have faulty ram or not.

Before you do that though, check your RAM voltage and manually set it to 1.65 volts this is standard.

[decrypter]

Before you take it to the repair shop, download memtest86 and run it on your ram, this will tell you if you have faulty ram or not.

Before you do that though, check your RAM voltage and manually set it to 1.65 volts this is standard.

Seems the ram i have and this mobo are not a good combo lots of bad things happening all the web

well i might have to rma the mobo and ram  ill see what reports i get back from repair shop i guess

p.s memtest dosent give guarenteed results