Official GIGABYTE Forum

Ivy Bridge and p67a d3 won't boot

Suse9

  • 6
  • 0
Ivy Bridge and p67a d3 won't boot
« on: May 18, 2012, 12:51:46 am »
I am facing a strange problem ' regarding mainly my cpu in combination with the motherboard.

History
i recently bought a new cpu i5 3550 (Ivy Bridge) to replace the old i5-2500


Configuration
CPU Intel   Core i5-3550   3.30GHz   6MB   650 MHz   Ivy Bridge   22nm   E1
MEMORY 1x4GB Kingston KHX1600C9D3/4G 1.65V 9905403-400.A00LF
MOTHERBOARD P67A-D3-B3   rev 1.0   F7 112540083316
GPU Gigabyte nvidia 560 3GV-N56GOC-1GI/F61
PSU akasa 600W
win 7 x64 pro

_The 1st Problem (^_^ easy one)
The motherboard (ga-p67a-d3-b3 rev1.0) couldn't start with the new cpu (i5-3550) , black screen.
_First step : i placed the old cpu (i5-2500) .
The computer booted and i did bios update .
The latest bios for my board is the F7.
I tried again to install the new cpu (i5-3550) on the ga-p67a-d3-b3 rev1.0 board .
The attempt was successful .

_The 2nd Problem
While now , system is able to boot, it becomes extremely unstable
(bsod 0x6b, system freeze ,etc) plus the post screen (the black one when computer starts)
 mentions the cpu as 3.5 GHz processor (it's 3.3G based on intel's site).
At least i  was able to boot in windows, i thought, but after two minutes got a wonderfull bluescreen 0x6b (0x00000etc all zeroes) .
In general the system is unstable , freezing , bsod's etc

_Second step : entered the bios , chose the M.I.T. menu , Advanced Freq Menu , in there i selected Advanced CPU core
and disabled the Intel(R) Turbo Boost Tech.
Result : now i am able to use windows but sometimes the system freezes , or stops during the startup.

Any idea ?

p.s. i attach photos from the bios .http://s1079.photobucket.com/albums/w511/Suse9/gigabyte%20Ivy%20Bridge/?albumview=slideshow
p.s.2 am i missing something obvious?
« Last Edit: May 18, 2012, 01:09:01 am by Suse9 »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Ivy Bridge and p67a d3 won't boot
« Reply #1 on: May 18, 2012, 09:09:58 am »
Hi

It might be worth trying to flash the BIOS back to F6 which is the version required for your CPU's support. Once flashed synchronise the two BIOS chips by pressing ALT+F12 when booting (as you would do with DEL to enter the BIOS) and it should copy over the Backup BIOS with the Main BIOS's contents.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Suse9

  • 6
  • 0
Re: Ivy Bridge and p67a d3 won't boot
« Reply #2 on: May 18, 2012, 09:34:49 am »
Hi

It might be worth trying to flash the BIOS back to F6 which is the version required for your CPU's support. Once flashed synchronise the two BIOS chips by pressing ALT+F12 when booting (as you would do with DEL to enter the BIOS) and it should copy over the Backup BIOS with the Main BIOS's contents.

cool , thank you for the quick  response Mantis.

Just flashed the motherboard bios back to F6 but something i am missing . I tried alt+f12 while i was booting but i am getting the boot menu .

Is the same thing f12 from inside the bios ? i just did it and selected default profile , not last known good conf etc .




Suse9

  • 6
  • 0
Re: Ivy Bridge and p67a d3 won't boot
« Reply #3 on: May 18, 2012, 09:50:07 am »
Now at the MIT current status turbo freq is 3.5 & non trurbo at 3.3 .
Plus windows identified the cpu  8)

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Ivy Bridge and p67a d3 won't boot
« Reply #4 on: May 18, 2012, 09:57:59 am »
From what you said it seems that the BIOS is the new EFI  version and it has written to both chips already then. No problem if that is the case.
 ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Suse9

  • 6
  • 0
Re: Ivy Bridge and p67a d3 won't boot
« Reply #5 on: May 18, 2012, 10:16:20 am »
grrr . system froze again , cant move mouse keyboard , nothing is responding .

what else to do :S
Memory is at 1.5 V based on thathttp://www.kingston.com/datasheets/KHX1600C9D3_4G.pdf termination,vref etc are at 1/2 .
Intel(R) turbo boost now is disabled .

run out of ideas .
« Last Edit: May 18, 2012, 10:19:10 am by Suse9 »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Ivy Bridge and p67a d3 won't boot
« Reply #6 on: May 18, 2012, 04:00:35 pm »
Quote
MEMORY 1x4GB Kingston KHX1600C9D3/4G 1.65V 9905403-400.A00LF

Is that correct ? You are running a single 4GB stick of memory. You will need to set it manually to 1.65v and the timings also.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Suse9

  • 6
  • 0
Re: Ivy Bridge and p67a d3 won't boot
« Reply #7 on: May 18, 2012, 04:47:58 pm »
Quote
MEMORY 1x4GB Kingston KHX1600C9D3/4G 1.65V 9905403-400.A00LF

Is that correct ? You are running a single 4GB stick of memory. You will need to set it manually to 1.65v and the timings also.

yes these is correct . I am running a single stick . I was a bit afraid to do so .

so , do you suggest something like that ?
http://s1079.photobucket.com/albums/w511/Suse9/GB%20ftw%20part%202/?albumview=slideshow
« Last Edit: May 18, 2012, 04:50:13 pm by Suse9 »

Suse9

  • 6
  • 0
Re: Ivy Bridge and p67a d3 won't boot
« Reply #8 on: May 21, 2012, 09:47:24 am »
pff i didn't manage to make the board work .

plus the gb support 3 days after still no reply :S kinda strange
« Last Edit: May 21, 2012, 09:48:36 am by Suse9 »