Official GIGABYTE Forum

Z77 motherboard

Z77 motherboard
« on: May 18, 2012, 01:00:44 pm »
Hi,

I am planning to buy a new Z77 gigabyte motherboard and the main focus will be putting 2 SSD into Raid 0. I had bad luck with my old gigabyte motherboard U55. It had only Marvell controllers  >:( and the speed was 3 times slower in Raid 0.

I planning to buy this motherboard: http://www.gigabyte.com/products/product-page.aspx?pid=4142&dl=#ov

Can somebody tell me what controllers this motherboard is using. I know that Marvell controllers are not so good. Intel controllers are much better.

Thanks everybody that can help me!

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Z77 motherboard
« Reply #1 on: May 18, 2012, 03:50:58 pm »
Hi

You are talking about the old Marvell 9128 controller chip, the new ones are fine. Besides the motherboard you are talking about doesn't have any Marvell on the board.  It has two 6GBs SATA ports and they would be the best ones to use for the SSD RAID0 array.  SATA3_0 and 1. It is much faster now. Even on your old board if you located the RAID on the two Intel ports they would have been quite fast just not up to SATA3 speeds.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: Z77 motherboard
« Reply #2 on: May 18, 2012, 06:08:03 pm »
Hi

You are talking about the old Marvell 9128 controller chip, the new ones are fine. Besides the motherboard you are talking about doesn't have any Marvell on the board.  It has two 6GBs SATA ports and they would be the best ones to use for the SSD RAID0 array.  SATA3_0 and 1. It is much faster now. Even on your old board if you located the RAID on the two Intel ports they would have been quite fast just not up to SATA3 speeds.

Thanks for the answer. So this motherboard: http://www.gigabyte.com/products/product-page.aspx?pid=4142&dl=#ov
Will not have the Marvell controllers? But what controllers it will use if i but 2 SSD into RAID0 into SATA 3? (Intel, Marvell or something else? - didn't find any info on gigabyte homepage)
« Last Edit: May 18, 2012, 06:09:35 pm by userz77 »