Official GIGABYTE Forum

X58A-UD3R Voltage Issue ?

X58A-UD3R Voltage Issue ?
« on: August 04, 2012, 10:21:08 am »
Hello !

I recently tried to reassemble a PC using a X58A-UD3R motherboard, an Intel Core i7 920 CPU, kingston DDR3 triple channel RAM and a gtx 560Ti Video card. PSU is a Corsair TX950W, tried with 3 Corsair Models...same thing. Trouble is after i try to power it on i get looped restarts and a series of indication led's.

- The SB Voltage blinks red before restarting
- Phase LEDs all light
- And a series of Green/Yellow/Green/Yellow from the DDR voltage ones

Any ideas?

Thanks

Re: X58A-UD3R Voltage Issue ?
« Reply #1 on: August 05, 2012, 10:15:33 am »
Anyone..?

Re: X58A-UD3R Voltage Issue ?
« Reply #2 on: August 08, 2012, 09:40:13 am »
 :) This must be a serious thing. All is want to know is if i can still use the motherboard. Thanks

Re: X58A-UD3R Voltage Issue ?
« Reply #3 on: August 21, 2012, 02:47:30 pm »
Should i try to do something to the mobo or use it as a carpet? What's up with those LED's ? Thank you

Re: X58A-UD3R Voltage Issue ?
« Reply #4 on: October 02, 2012, 07:51:21 am »
Help....?!

Fatman

  • 523
  • 18
Re: X58A-UD3R Voltage Issue ?
« Reply #5 on: October 02, 2012, 08:08:03 am »
When you reasembled the PC did you go into Bios abd load optimised defaults? And then did you set the correct voltages for your ram? Did you try flashing the bios?

Re: X58A-UD3R Voltage Issue ?
« Reply #6 on: October 02, 2012, 08:23:46 am »
Hello Fatman and thank you for stopping by to help me !

This motherboard was given to me from a friend! When i tried to assemble a PC, all i could get was looped restarts, and that series of LED's flashing. I could not go into Bios to load the optimized defaults, and i think the bios WAS flashed to ver. FF! What happened before i got it i have no ideea.

What i want to know if that it is still fixable? (and if so ...what to do)

Thanks again !

Vezina

  • 871
  • 10
  • If it s not broken, fix it until it is !
Re: X58A-UD3R Voltage Issue ?
« Reply #7 on: October 02, 2012, 08:40:27 am »
This happens in some Intel systems ,loops or cold boot issues.
Some have this some don t.
It could be related to the chipset or to the CPU.
This is one of the reasons i avoid Intel ;D
Over & Out !

AMD FX (APU-s included) users should install - KB2645594 & KB2646060 under Windows 7

1.ASUS Sabertooth 990FX 2.0 + FX 6300 + H60
2.MSI A88X-G41 PC Mate + A8 5600K + Hyper TX 2
3.Gigabyte F2A75-D3H + A4 5300
4.ASUS AM1M-A + Athlon 5150

Re: X58A-UD3R Voltage Issue ?
« Reply #8 on: October 02, 2012, 12:26:10 pm »
Still, can the motherboard be saved somehow!?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: X58A-UD3R Voltage Issue ?
« Reply #9 on: October 02, 2012, 01:18:24 pm »
Hi

I think that you need to take a more logical approach to the faultfinding on this board if you are to find a cure.

Firstly have you got a buzzer/speaker attached and if so what beep code do you get when booting ? If you haven't got one then get one and post back with the answer.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy