Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Torgrim on December 30, 2009, 10:52:28 pm

Title: Non-standard pinout on front panel audio HDA-port
Post by: Torgrim on December 30, 2009, 10:52:28 pm

Hi,

I've noticed that several of Gigabyte motherboards, among others GA-P55A-UD4 and GA-P55-UD6,  have pinout mismatches compared to Intel's referance design for HDA.

According to the manual of the GA-P55A-UD4,  the board's HDA pinouts are:

1 MIC2_L
2 GND
3 MIC2_R
4 -ACZ_DET
5 LINE2_R
6 GND
7 FAUDIO_JD
8 No Pin
9 LINE2_L
10 GND

But according to Intels reference design, it should be:

1 PORT 1L
2 GND
3 PORT 1R
4 PRESENCE#
5 PORT 2R
6 SENSE1_RETURN
7 SENSE_SEND
8 KEY Connector Key
9 PORT 2L
10 SENSE2_RETURN

For some reason pin 6 and 10 are grounded by Gigabyte, when they should in fact be representing jack detection return for port 1 (mic) and 2 (headphones).

Can anyone give some input on why this is?

Thanks in advance!

Title: Re: Non-standard pinout on front panel audio HDA-port
Post by: Pottypete on December 30, 2009, 11:52:42 pm

Hi,
You would be better to address this question to  tech support .
http://www.giga-byte.co.uk/
cheers

Title: Re: Non-standard pinout on front panel audio HDA-port
Post by: fadsarmy on January 05, 2010, 07:10:47 pm

Quote from: Torgrim on December 30, 2009, 10:52:28 pm

Hi,

I've noticed that several of Gigabyte motherboards, among others GA-P55A-UD4 and GA-P55-UD6,  have pinout mismatches compared to Intel's referance design for HDA.

According to the manual of the GA-P55A-UD4,  the board's HDA pinouts are:

1 MIC2_L
2 GND
3 MIC2_R
4 -ACZ_DET
5 LINE2_R
6 GND
7 FAUDIO_JD
8 No Pin
9 LINE2_L
10 GND

But according to Intels reference design, it should be:

1 PORT 1L
2 GND
3 PORT 1R
4 PRESENCE#
5 PORT 2R
6 SENSE1_RETURN
7 SENSE_SEND
8 KEY Connector Key
9 PORT 2L
10 SENSE2_RETURN

For some reason pin 6 and 10 are grounded by Gigabyte, when they should in fact be representing jack detection return for port 1 (mic) and 2 (headphones).

Can anyone give some input on why this is?

Thanks in advance!

My motherboard has a similar pin configuration but it still works with a standard HD front panel connector of CM Cosmos chassis and Zalman GS1000.