Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: andjayik on August 26, 2010, 01:40:58 pm
-
Computerwas working fine last night, turned it on this morning and getting Verifying dmi pool data, amd data change update new data to dmi!
Computer won't go past this on the bios screen? Tried reseting bios to load optimal settings and same thing. Recently updated bios to F9. Can i go back to F1
-
Hi there,
To answer your question yes, you can go back to BIOS F1 if you want to. A couple of questions though.....
Did you use QFlash to update BIOS or @BIOS?
Did you jump from F1 straight to F9 or did you do it in a couple of jumps?
What motherboard are you using?
-
Yes i did use qflash
i went from f1 right to f9
mt mobo is in my signature GIGABYTE MA785GMT-UD2H
What can be causing this?
-
It is always best to update the BIOS in stages if it is a big difference. Just safer that way. It will probably be beneficial to go back and then when you are sure it is stable and running properly reinstall the later BIOS in stages.
-
Thanks for the advise but i need to know why all of a sudden i get this message and it wont go into win 7?
-
What can be causing this?
To be honest it could be a number of things.
Before re-flashing BIOS I would suggest clearing CMOS just to see if that clears the problem.
When you flashed BIOS did you Disable the "Keep DMI Data" option in QFlash before you updated?
sorry when I asked about your Mobo I actually meant to ask for Revision No.
-
to clear the cmos do u just unplugg the computer for a bit?
-
A little more involved than that. Check out the FAQ here: http://forum.giga-byte.co.uk/index.php/topic,2286.0.html which tells you what to do.