Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: marag on April 16, 2011, 12:22:41 am

Title: Intel Management Engine Interface (error in device management)
Post by: marag on April 16, 2011, 12:22:41 am

Hello,

I just bought a new Mobo GA-PH67A-UD3-B3 , installed Win7 64bit and even after finishing updates and evrything
still got the "Intel Management Engine Interface" error (!) in device management

please advise,

Thank you

Title: Re: Intel Management Engine Interface (error in device management)
Post by: Dark Mantis on April 16, 2011, 08:53:00 am

Hi and welcome.

You have made an error in the motherboard name, I don't know whether we are  dealing with a P67 or H67 board. Anyhow, This can happen for a number of reason and all of which seem to be different. Try doing these first and we will try to narrow it down.

Here is a utility that you can see if your system supports Intel vPro Technology:
http://www.intel.com/support/processors/tools/vptu/sb/CS-023240.htm

Make sure that you have Optimised BIOS Default settings loaded.

Check that your memory modules are in the correct slots ie normally DDR3_1 and DDR3_3

Title: Re: Intel Management Engine Interface (error in device management)
Post by: marag on April 16, 2011, 12:23:38 pm

Quote from: Dark Mantis on April 16, 2011, 08:53:00 am

Hi and welcome.

You have made an error inthe motherboard name, I don't know whether we are  dealing with a P67 or H67 board. Anyhow, This can happen for a number of reason and all of which seem to be different. Try doing these first and we will try to narrow it down.

Here is a utility that you can see if your system supports Intel vPro Technology:
http://www.intel.com/support/processors/tools/vptu/sb/CS-023240.htm

Make sure that you have Optimised BIOS Default settings loaded.

Check that your memory modules are in the correct slots ie normally DDR3_1 and DDR3_3

Hello my friend,

The board name is correct ( I can take a pic of the box  if you like) its an H67 chipset and I have allready flashed the bios to the final version (F3) . I have 4 dimms of 2GB DDR3 @ 1600 modules , total 8GB running at 1333. The bios have the default values and really dont know what else to do !

Thank you very much !!!

Title: Re: Intel Management Engine Interface (error in device management)
Post by: Dark Mantis on April 16, 2011, 01:03:13 pm

Hi Buddy,

Sorry my bad about the name just didn't recognise it at first. :-[

I notice that the link no longer works either and I got that off the Intel site. ::)

Maybe a more comprehensive list of your hardware might help.

Title: Re: Intel Management Engine Interface (error in device management)
Post by: Lsdmeasap on April 17, 2011, 12:21:58 am

Please install this latest version of the Intel HECI Management Engine
http://downloadmirror.intel.com/19691/eng/MEI_allOS_7.1.10.1065.exe

Title: Re: Intel Management Engine Interface (error in device management)
Post by: marag on April 17, 2011, 09:17:36 am

I will give it a try, thanks !!!  ;)