Official GIGABYTE Forum

Intel Management Engine Interface (error in device management)

marag

  • 3
  • 0
Hello,

I just bought a new Mobo GA-PH67A-UD3-B3 , installed Win7 64bit and even after finishing updates and evrything
still got the "Intel Management Engine Interface" error (!) in device management

please advise,

Thank you

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Intel Management Engine Interface (error in device management)
« Reply #1 on: April 16, 2011, 08:53:00 am »
Hi and welcome.

You have made an error in the motherboard name, I don't know whether we are  dealing with a P67 or H67 board. Anyhow, This can happen for a number of reason and all of which seem to be different. Try doing these first and we will try to narrow it down.

Here is a utility that you can see if your system supports Intel vPro Technology:
http://www.intel.com/support/processors/tools/vptu/sb/CS-023240.htm

Make sure that you have Optimised BIOS Default settings loaded.

Check that your memory modules are in the correct slots ie normally DDR3_1 and DDR3_3
« Last Edit: April 16, 2011, 12:54:07 pm by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

marag

  • 3
  • 0
Re: Intel Management Engine Interface (error in device management)
« Reply #2 on: April 16, 2011, 12:23:38 pm »
Hi and welcome.

You have made an error inthe motherboard name, I don't know whether we are  dealing with a P67 or H67 board. Anyhow, This can happen for a number of reason and all of which seem to be different. Try doing these first and we will try to narrow it down.

Here is a utility that you can see if your system supports Intel vPro Technology:
http://www.intel.com/support/processors/tools/vptu/sb/CS-023240.htm

Make sure that you have Optimised BIOS Default settings loaded.

Check that your memory modules are in the correct slots ie normally DDR3_1 and DDR3_3



Hello my friend,

The board name is correct ( I can take a pic of the box  if you like) its an H67 chipset and I have allready flashed the bios to the final version (F3) . I have 4 dimms of 2GB DDR3 @ 1600 modules , total 8GB running at 1333. The bios have the default values and really dont know what else to do !

Thank you very much !!!

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Intel Management Engine Interface (error in device management)
« Reply #3 on: April 16, 2011, 01:03:13 pm »
Hi Buddy,

Sorry my bad about the name just didn't recognise it at first. :-[

I notice that the link no longer works either and I got that off the Intel site. ::)

Maybe a more comprehensive list of your hardware might help.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Lsdmeasap

  • 1166
  • 58
    • Gigabyte Support (TweakTown USA)
Re: Intel Management Engine Interface (error in device management)
« Reply #4 on: April 17, 2011, 12:21:58 am »
Please install this latest version of the Intel HECI Management Engine
http://downloadmirror.intel.com/19691/eng/MEI_allOS_7.1.10.1065.exe

marag

  • 3
  • 0
Re: Intel Management Engine Interface (error in device management)
« Reply #5 on: April 17, 2011, 09:17:36 am »
I will give it a try, thanks !!!  ;)