Official GIGABYTE Forum

Z270x Gaming 7 ,Win10 freezes at restart Error Code 8

Hosney

  • 5
  • 0
Z270x Gaming 7 ,Win10 freezes at restart Error Code 8
« on: October 17, 2018, 10:35:19 am »
When i press restart the PC freezes for one sec. then windows shuts down but the pc does not boot with error code 8 so i have to clear the cmos then configure it again in order to boot normally, this happends randomly not at every reboot.
I dont know what to do to fix this problem.
« Last Edit: October 17, 2018, 10:38:08 am by Hosney »

shadowsports

  • 1761
  • 52
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Z270x Gaming 7 ,Win10 freezes at restart Error Code 8
« Reply #1 on: October 17, 2018, 02:00:11 pm »
When i press restart the PC freezes for one sec. then windows shuts down but the pc does not boot with error code 8 so i have to clear the cmos then configure it again in order to boot normally, this happends randomly not at every reboot.
I dont know what to do to fix this problem.


Greetings,
There is no diagnostic or error code documented for "8".

Please provide your full system specs

Did the system restart behavior ever work as expected?

Has any new hardware been added recently?

Was this a fresh install of windows 10, or did you migrate the install from another system?

Have you updated the BIOS?

And..  are you using any utilities (software) with hardware profiles for fans, GPU, etc?

Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 2080 FTW3 Ultra, 960 Pro_m.2, W10 1903
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W10 1903
Z97X-UD5H \850w, 4790K, 16GB Vengeance, GTX 970 FTW SC, RAID0

Hosney

  • 5
  • 0
Re: Z270x Gaming 7 ,Win10 freezes at restart Error Code 8
« Reply #2 on: October 20, 2018, 07:14:04 pm »
The problem has started after updating the rgb fusion software to the latest version and now the system is stable after uninstalling it. So what does the error code 8 means?

shadowsports

  • 1761
  • 52
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Z270x Gaming 7 ,Win10 freezes at restart Error Code 8
« Reply #3 on: October 21, 2018, 12:23:54 pm »
The problem has started after updating the rgb fusion software to the latest version and now the system is stable after uninstalling it. So what does the error code 8 means?

As I said previously, there is no documented definition for error code 8.  You will have to contact Gigabyte support for more information. 

https://www.gigabyte.com/us/Support

Since you reported this behavior is related to software, disabling "Fast Start Up" in Power Management might help correct the behavior.  Or, just stick with the version of RGB Fusion that works.
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 2080 FTW3 Ultra, 960 Pro_m.2, W10 1903
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W10 1903
Z97X-UD5H \850w, 4790K, 16GB Vengeance, GTX 970 FTW SC, RAID0

 

anything