Gigabyte GA-PH67A-UD3, constant beeping

[coolzombie]

Hello!

I just bought a PC and built it on my very own for the first time!

Everything seemed to go pretty well until I was finished. The only thing I did was to attach the power cord to see if everything went well when I booted it, like all fans working etc etc. But when I booted the computer a loud screeching beep started and it was constant. The Phase led lights are orange, orange, green, green from up to down. I reinstalled the CPU fan and the RAM memories in hope of it fixing it which it didn't. I have also attached both the 8pin and the 24pin cords from the PSU.

My setup is

Gigabyte GA-PH67A-UD3
500GB Western Digital Caviar Blue SATA II x2
Corsair 2GB 1333MHz 1.5V Value Select x2
Intel Core i5 2500K 3,3GHz
Gigabyte Radeon HD6950 2GB
Cooler Master Elite 334
Optiarc AD-7260S DVD±RW Svart SATA, OEM
Corsair VX 550W 80

Thank you in advance!

[F5BJR]

*
Have you used for your memory stick DDR3-1 and DDR3-3 ?

Pierre

* Color for Phase Led doesn't represent diagnostic

[coolzombie]

*
Have you used for your memory stick DDR3-1 and DDR3-3 ?

Pierre

Sorry could you explain a bit further? I didn't understand :/.

[F5BJR]

*/
look page 16 (documentation  in english )

You have the configuration table for the dual channel memory

Pierre

[coolzombie]

Ok, yes. First i tried slot 1 and 3, after that I tried slot 2 and 4 aswell but it gave the same result, I also tried to only have 1 RAM in

[F5BJR]

*
Look the Qualified Vendors List for Memory

http://download.gigabyte.eu/FileList/Memory/mb_memory_ga-ph67a-ud3.pdf

Possible that your sticks are compatible , possible not
*
How did you manage to acquire the motherboard and the processor and RAM chips (completely randomly)?
*
Pierre

[coolzombie]

memorytype   DDR3
capacity   2 GB, 1x2048MB
speed   1333 MHz, PC10666
Formfaktor   240-pin DIMM
Tension   1.5V


No I bought the Ram, motherboard and processor since I knew they would match

[F5BJR]

I have no idea

-> except to check that your installation is well done

-> that you have set the processor / cooler

*
If not remove all of the box
 
try separately just with the buzzer / speaker , with processor and one RAM chips in the right media

no graphics card , no usb , no keyboard at this time

start if there is still the same noise

Pierre

[coolzombie]

I haven't installed any OS yet, I just tried to start it right of the bat when everything was installed into the box

[Dark Mantis]

memorytype   DDR3
capacity   2 GB, 1x2048MB
speed   1333 MHz, PC10666
Formfaktor   240-pin DIMM
Tension   1.5V


No I bought the Ram, motherboard and processor since I knew they would match

I just love the faith some people have

It is quite possible that the modules are not comaptible even though the specs read correctly!