GA-770T-USB3 WITH 1600MHZ MEMORIES

[xworld]

GA-770T-USB3 MOBO
AMD-Phenom II X6 1055T
KINGSTON HYPER-X (2X4G) DDR3 @ 1600MHZ (actually only runs @ 1333mhz)

What settings i need to change to run my new memories at 1600mhz, help please!

[absic]

Hi there,

You might want to read this thread: http://forum.giga-byte.co.uk/index.php/topic,2515.0.html before you decide to run your RAM at 1600MHz

[furb1]

You can change the memory divider, and manually set RAM voltage and timing per spec, but the experts have warned that the memory controller is not designed for more than 1333MHz.  Translation...it can be tricky to run at 1600MHz (higher NB voltage), and you may fry the CPU over the long run.

I've opted for a 10% bump over 1333MHz, then lower the timing.  My memory is running at 1460MHz with 1.65V and 7-7-6-20-27-1T.