Windows7 installation don´t recognize marvel raid driver

[Oxirius]

I want to install windows7 on a raid0 with 2 SSD. But at drive config. Windows don´t recognize the Marvell driver. Any help?

[Gloup_Gloup]

Hi Oxirius,  

Welcome to forum,

Connect all Hard Drive, SSD  to ICH SATA With Intel IRST drivers. Check in the manual, if need.

Have you set a AHCI in BIOS, for your Hard Drive?
The best is make this BEFORE installing Windows.
Otherwise go here:
How can I switch to AHCI Mode after installing Windows in IDE Mode?
http://forum.giga-byte.co.uk/index.php/topic,6721.0.html

Marvell GSata is for CD, DVD drive or same mobile drive. Not for OS system or Hard Disk, etc.
Is not good for OS drive system because performance are bad.
Do not Forgot remove drivers Marvell, Before install new Intel drivers.
More help here:
http://forum.giga-byte.co.uk/index.php/topic,7449.msg59137.html#msg59137

Intel IRST:
http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Chipsets&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+Rapid+Storage+Technology

If you want receive a more help, give us quickly more details about your system configuration.

Like exactly Brands and Model of:

Motherboard, PSU, Ram, Hard Disk, SSD, graphics cards, etc...

Weblink from brand, for each is greatly appreciated... Thank.

Gloup_Gloup.

[Dark Mantis]

Hi

Make sure that you have the correct and latest drivers loaded and in the correct order. Make sure that you have the Intel IRST drivers up to date too.