Official GIGABYTE Forum

780T & memory confusion

780T & memory confusion
« on: June 09, 2013, 08:35:19 pm »
Hi all, this is my 1st post, so hiya everyone - ok,

I have the GA-780T-D3L motherboard with the F3 Bios update. I have been trying to install 2 x 4GB Corsair memory modules in the board but I am having trouble.

The system runs fine on either ram stick (left hand slot) but when i try either putting one in each slot or 1 at a time in the right hand slot, I get a blank screen and a repeated long beep. Whats even stranger is that (according to the manual) 1 repeated long beep is to do with the graphics card...there is nothing wrong with the graphics card as it doesn't happen when there is 1 stick in the left hand slot.

 I have tryed re-seating the memory, pressing it in firmly and making sure there is no dust in the slots. Any ideas?

AgentFXA

  • 379
  • 17
    • none
Re: 780T & memory confusion
« Reply #1 on: June 09, 2013, 11:53:00 pm »
Flush the bios and reset/load all defaults - this may help?
X570 Aorus Elite Wifi / Ryzen 2700x / Gigabyte Radeon RX 7900 XT Gaming OC 20G Graphics Card / 16 GB HyperX Predator 3200 / SeaSonic 850W / Tt View 71 TG / Win10x64

Re: 780T & memory confusion
« Reply #2 on: June 12, 2013, 05:15:50 pm »
Hi, sorry for the delay - thought the forum would send an email notification about new posts, never mind. Thanks for the reply. Tried updating bios (latest version, but tried it anyways) and still nothing. :-[

Vezina

  • 871
  • 10
  • If it s not broken, fix it until it is !
Re: 780T & memory confusion
« Reply #3 on: June 12, 2013, 07:36:23 pm »
Most probable a compatibility problem.
You need either a new BIOS either kits of 2Gigs sticks.
Over & Out !

AMD FX (APU-s included) users should install - KB2645594 & KB2646060 under Windows 7

1.ASUS Sabertooth 990FX 2.0 + FX 6300 + H60
2.MSI A88X-G41 PC Mate + A8 5600K + Hyper TX 2
3.Gigabyte F2A75-D3H + A4 5300
4.ASUS AM1M-A + Athlon 5150

Re: 780T & memory confusion
« Reply #4 on: June 13, 2013, 01:53:36 pm »
Hmmm, might as well stick with my single 4gb stick then. No point using the 2 slots for the sake of it. Just weird it works with 1 and not 2. Suppose the slot could be damaged.