Official GIGABYTE Forum

GA-MA785GT-UD3H Memory placement 1x4gb & 2x1gb

GA-MA785GT-UD3H Memory placement 1x4gb & 2x1gb
« on: October 06, 2013, 11:28:03 pm »
I did not see a search box here, so I'm posting blind.

I  have 2 x 1gb ballistix pc3 - 12800 cl8 1.65 volt which I replaced with:

1 x 4gb G.SKILL RIPJAWS  DDr3 1600 PC3 12800 CL9-9-9-24 1.5v.

Common sense and the manual infer that the 1gb sticks go in dd3-1 and ddr3-2

and the 4 gb stick in either ddr3-3 or dd3r-4.  Does it matter which?

First off, will this work on a 64bit Win7 Ultra?

Next, will I see 6GB total memory?

Are they dissimilar enough not to attempt this??

Thanx ;)

CPU is AMD Athlon II X4 630
« Last Edit: October 06, 2013, 11:30:25 pm by webster »

autotech

  • 1553
  • 35
Re: GA-MA785GT-UD3H Memory placement 1x4gb & 2x1gb
« Reply #1 on: October 08, 2013, 01:55:36 am »
It is not going to run dual channel either was so put the 2 x 1 gig sticks in the first two slots then the 4 gig in the next.
GA-Z170X-UD5,Core i5-6600K,16 GIG,3200 ram ,2 X Corsair 240GB SATA III SSD, 500 gig HD,7 ult 64\, Rx-480 8gig\

Z97X-SOC GIGABYTE, I5 4670k, 16 gig 1600 ram, 240 gig sata3 SSD,1x 500HD/ R9 280x, corsair 650 RM PSU

GA-Z97X-Gaming G1,850 corsair,,DDR4 3200,240SSd,6950 video,850EVA

Re: GA-MA785GT-UD3H Memory placement 1x4gb & 2x1gb
« Reply #2 on: October 08, 2013, 05:34:10 am »
Okay...

That supports what I suspected.


Sure appreciate the reply and the hellp!