Official GIGABYTE Forum

GA-78LMT-USB3 constant Blue Screens

absic

  • *
  • 5815
  • 529
  • Never give up; Never surrender!
    • Bandcamp
GA-78LMT-USB3 constant Blue Screens
« on: December 10, 2014, 06:54:30 am »
The following issue was sent to me via PM.

I am on Gigabyte GA-78LMT-USB3 Motherboard with Corsair DDR3 4 GB(1 x 4GB) PC RAM (CMV4GX3M1A1600C11)
,but on using my PC for the first month it managed to show me 6-7 blue screen error and using blue screen viewer i found the 

121014-11824-01.dmp   
10-Dec-14 9:39:23 AM   
MEMORY_MANAGEMENT   
0x0000001a
0x00041287
0x000a773b
0x00000000
0x00000000
halmacpi.dll
halmacpi.dll+fe20
Hardware Abstraction Layer DLL
Microsoft® Windows® Operating System
Microsoft Corporation   6.1.7600.16385 (win7_rtm.090713-1255)   32-bit   
ntkrnlpa.exe+858e3
ntkrnlpa.exe+465f8
ntkrnlpa.exe+4703d   
      
C:\Windows\Minidump\121014-11824-01.dmp
6   
15
7600   
145,440
10-Dec-14 9:40:49 AM   


Does My RAM 1600Mhz and board are conflicting with each other,i have not done any manual configuration for RAM in BIOS (O.C or something) so what should i do,even tried recovery option.


With this kind of issue the first thing to try and do is actually establish where the error is occurring as it could be due to hardware or software or even both. To do this try running in Safe Mode or run one of the free Linux distributions such as Ubuntu, live from a USB Pendrive. If you don't get a BSOD when doing this then the problem is more likely to me from the software rather than the hardware.

It would also help if you could post back with a full list of your hardware, especially the revision of your motherboard, GPU, PSU, Hard drives/SSD's , mouse, keyboard etc as this information might help narrow down the problem.
Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.

Re: GA-78LMT-USB3 constant Blue Screens
« Reply #1 on: December 10, 2014, 09:48:11 am »
The following issue was sent to me via PM.

I am on Gigabyte GA-78LMT-USB3 Motherboard with Corsair DDR3 4 GB(1 x 4GB) PC RAM (CMV4GX3M1A1600C11)
,but on using my PC for the first month it managed to show me 6-7 blue screen error and using blue screen viewer i found the 

121014-11824-01.dmp   
10-Dec-14 9:39:23 AM   
MEMORY_MANAGEMENT   
0x0000001a
0x00041287
0x000a773b
0x00000000
0x00000000
halmacpi.dll
halmacpi.dll+fe20
Hardware Abstraction Layer DLL
Microsoft® Windows® Operating System
Microsoft Corporation   6.1.7600.16385 (win7_rtm.090713-1255)   32-bit   
ntkrnlpa.exe+858e3
ntkrnlpa.exe+465f8
ntkrnlpa.exe+4703d   
      
C:\Windows\Minidump\121014-11824-01.dmp
6   
15
7600   
145,440
10-Dec-14 9:40:49 AM   


Does My RAM 1600Mhz and board are conflicting with each other,i have not done any manual configuration for RAM in BIOS (O.C or something) so what should i do,even tried recovery option.


With this kind of issue the first thing to try and do is actually establish where the error is occurring as it could be due to hardware or software or even both. To do this try running in Safe Mode or run one of the free Linux distributions such as Ubuntu, live from a USB Pendrive. If you don't get a BSOD when doing this then the problem is more likely to me from the software rather than the hardware.

It would also help if you could post back with a full list of your hardware, especially the revision of your motherboard, GPU, PSU, Hard drives/SSD's , mouse, keyboard etc as this information might help narrow down the problem.

But the blue screen error is not always happening,sometimes it greets me the next i.e one day free from this blue screen,So how could i use  Windows in safe mode for a whole day or two.
Does it in any way due to frequency of RAM and Motherboard Compatibility?

Re: GA-78LMT-USB3 constant Blue Screens
« Reply #2 on: December 10, 2014, 09:50:55 am »
The following issue was sent to me via PM.

I am on Gigabyte GA-78LMT-USB3 Motherboard with Corsair DDR3 4 GB(1 x 4GB) PC RAM (CMV4GX3M1A1600C11)
,but on using my PC for the first month it managed to show me 6-7 blue screen error and using blue screen viewer i found the 

121014-11824-01.dmp   
10-Dec-14 9:39:23 AM   
MEMORY_MANAGEMENT   
0x0000001a
0x00041287
0x000a773b
0x00000000
0x00000000
halmacpi.dll
halmacpi.dll+fe20
Hardware Abstraction Layer DLL
Microsoft® Windows® Operating System
Microsoft Corporation   6.1.7600.16385 (win7_rtm.090713-1255)   32-bit   
ntkrnlpa.exe+858e3
ntkrnlpa.exe+465f8
ntkrnlpa.exe+4703d   
      
C:\Windows\Minidump\121014-11824-01.dmp
6   
15
7600   
145,440
10-Dec-14 9:40:49 AM   


Does My RAM 1600Mhz and board are conflicting with each other,i have not done any manual configuration for RAM in BIOS (O.C or something) so what should i do,even tried recovery option.


With this kind of issue the first thing to try and do is actually establish where the error is occurring as it could be due to hardware or software or even both. To do this try running in Safe Mode or run one of the free Linux distributions such as Ubuntu, live from a USB Pendrive. If you don't get a BSOD when doing this then the problem is more likely to me from the software rather than the hardware.

It would also help if you could post back with a full list of your hardware, especially the revision of your motherboard, GPU, PSU, Hard drives/SSD's , mouse, keyboard etc as this information might help narrow down the problem.

But the blue screen error is not always happening,sometimes it greets me the next i.e one day free from this blue screen,So how could i use  Windows in safe mode for a whole day or two.
Does it in any way due to frequency of RAM and Motherboard Compatibility?

Here is my mobo

AMD 3.5 AM3+ FX 6-Core Edition FX-6300 (FD6300WMHKBOX) Processor
Gigabyte GA-78LMT-USB3 Motherboard
Corsair DDR3 4 GB(1 x 4GB) PC RAM (CMV4GX3M1A1600C11)
Seagate Barracuda (ST500DM002) Internal Hard Drive (500GB)
Sapphire AMD/ATI Radeon R7 240 with Boost 1 GB DDR5 Graphics Card
Deepcool GAMMAXX 200 CPU Cooler
Corsair VS 550 SMPS

absic

  • *
  • 5815
  • 529
  • Never give up; Never surrender!
    • Bandcamp
Re: GA-78LMT-USB3 constant Blue Screens
« Reply #3 on: December 10, 2014, 07:09:47 pm »
Have you run Memtest to see if it is a problem with your RAM module or CPU?

If you haven't done so then I would recommend doing that before you start looking to change things in BIOS. You can download Memtest 86 from here: http://www.memtest86.com/index.html and if you haven't used this program before take the time to check out this page: http://www.memtest86.com/technical.htm which will help.
Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.

dmdilks

  • 3093
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: GA-78LMT-USB3 constant Blue Screens
« Reply #4 on: December 10, 2014, 07:44:29 pm »
But the blue screen error is not always happening,sometimes it greets me the next i.e one day free from this blue screen,So how could i use  Windows in safe mode for a whole day or two.
Does it in any way due to frequency of RAM and Motherboard Compatibility?

I know it isn't the same board but BSOD can be almost anything. I run a Ga-X99-UD4. I have had BOSD just like you. I could go for days and mine only happen when playing games.

I have tried to update my video software and that made things worse. I run a 39" LED TV for my monitor. It made the screen look really bad. So I went a different route.

I tried another video card again it made it worse. I even updated the bios really no help. Then I tried another video card and so far it hasn't BSOD for over 2 weeks. The thing is I have used the same version driver software with all 3 cards too.

Plus the other two video cards are running in 2 other computers just fine. So what I'm trying to said that not parts work together sometimes. How the memory might pass but it could be that the memory and motherboard don't play well together.
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: GA-78LMT-USB3 constant Blue Screens
« Reply #5 on: December 14, 2014, 03:29:53 pm »
Have you run Memtest to see if it is a problem with your RAM module or CPU?

If you haven't done so then I would recommend doing that before you start looking to change things in BIOS. You can download Memtest 86 from here: http://www.memtest86.com/index.html and if you haven't used this program before take the time to check out this page: http://www.memtest86.com/technical.htm which will help.


I have tried the same and it shows ERROR:0 but some intregat..... was there,i don't know what does that mean and after 100% process it showed me small fact mentioning 0 errors and process is complete and press Esc to quit and then i was out.

Re: GA-78LMT-USB3 constant Blue Screens
« Reply #6 on: December 14, 2014, 03:40:22 pm »
But the blue screen error is not always happening,sometimes it greets me the next i.e one day free from this blue screen,So how could i use  Windows in safe mode for a whole day or two.
Does it in any way due to frequency of RAM and Motherboard Compatibility?

I know it isn't the same board but BSOD can be almost anything. I run a Ga-X99-UD4. I have had BOSD just like you. I could go for days and mine only happen when playing games.






I have tried to update my video software and that made things worse. I run a 39" LED TV for my monitor. It made the screen look really bad. So I went a different route.

I tried another video card again it made it worse. I even updated the bios really no help. Then I tried another video card and so far it hasn't BSOD for over 2 weeks. The thing is I have used the same version driver software with all 3 cards too.

Plus the other two video cards are running in 2 other computers just fine. So what I'm trying to said that not parts work together sometimes. How the memory might pass but it could be that the memory and motherboard don't play well together.



I  have now encountered a more new problem my PC wakes up automatically from hibernation just after a period of 5 second and using different way i found that my Realtek PCIe GBE Family Controller have some issue ,so i got an update on driver but no winning stroke no i think that i have to uncheck it option foe allow it to wake computer.Any Suggestions........

Re: GA-78LMT-USB3 constant Blue Screens
« Reply #7 on: December 14, 2014, 03:45:49 pm »
But the blue screen error is not always happening,sometimes it greets me the next i.e one day free from this blue screen,So how could i use  Windows in safe mode for a whole day or two.
Does it in any way due to frequency of RAM and Motherboard Compatibility?

I know it isn't the same board but BSOD can be almost anything. I run a Ga-X99-UD4. I have had BOSD just like you. I could go for days and mine only happen when playing games.






I have tried to update my video software and that made things worse. I run a 39" LED TV for my monitor. It made the screen look really bad. So I went a different route.

I tried another video card again it made it worse. I even updated the bios really no help. Then I tried another video card and so far it hasn't BSOD for over 2 weeks. The thing is I have used the same version driver software with all 3 cards too.

Plus the other two video cards are running in 2 other computers just fine. So what I'm trying to said that not parts work together sometimes. How the memory might pass but it could be that the memory and motherboard don't play well together.



I  have now encountered a more new problem my PC wakes up automatically from hibernation just after a period of 5 second and using different way i found that my Realtek PCIe GBE Family Controller have some issue ,so i got an update on driver but no winning stroke no i think that i have to uncheck it option foe allow it to wake computer.Any Suggestions........



I have already shifted the RAM from its previous slot and even got the graphic card out and again placed it back but still i'm suffering from the same and also done that memtest........

Re: GA-78LMT-USB3 constant Blue Screens
« Reply #8 on: December 16, 2014, 07:51:12 pm »
Any hardware changes before the problem started?  Software additions? Mem-stick most likely...(I've seen mem-sticks do all kinds of crazy things.) When I have the presence of mind to remember. I allway ground myself to the computer case before handling any of the parts. Malware is common problem that can doit too.  Passed Memtest? How many passes? Memtest doesn't allways work that good on 1 pass. On the other hand s&m works maybe little too good.  About the only thing I can think of really is to borrow a known good stick,from someone handle it very carefully and try it.  Alot of other things can cause the problem. But from where I sit those are the two most likely.

Best to you and G'luck with that.
"Clay"

Edit: At Tomshardware and techspot.(and many many more)There seem to quite a few threads started concerning BSOD's and the halmacpi.dll I didn't see any real solutions yet though. http://www.techspot.com/community/topics/halmacpi-dll-ntkrnlpa-exe-bsods-on-fresh-win-7-install.179580/  Of course the tech(s),make the OP jump through all the usual hoops.   I'll keep looking and try to spare you as many questions as I can.
« Last Edit: December 16, 2014, 08:48:59 pm by OldClay »
990fxa ud7 rev 1.1 f11d fx8350r Black Ed.  (Also a P43t C2D E8400@3720)
2x4gb mushkin silverline 1333 (cas9)
gtx570 sc
1tb wd black Ed, 2x1.5tb seagates,640 gb WD,2x74gig raptor2's for raid-0.
Koolance a380,mp655 pump,PA140.3 rad.
Corsair 850tx +TT430