Official GIGABYTE Forum

GA-P55-UD4 have M.2 connector for SSD?

shadowsports

  • 2259
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: GA-P55-UD4 have M.2 connector for SSD?
« Reply #15 on: April 28, 2017, 04:23:31 pm »
What lepiaf37 didn't take into consideration is what I mentioned above...  the adapter card will

a) Reduce the speed of your primary PCIe slot from x16 to x8
b) Only operate at x1, PCIe Gen 2.0

Regarding re-use of your components.  Your Lynnfied CPU is over 8 yrs old and only supports 1066/1333Mhz memory. 

Socket 1156 processors were P55/H57 chipsets.  Example below:

http://www.gigabyte.us/Motherboard/Intel-Socket-1156

Because of its age, there is no upgrade (swap) option. I suggested a standard SSD because it is compatible with a greater number of boards.

If you decide to stay where you are, then I would consolidate.  Buy 1 bigger drive (dump two smaller disks) and add the standard SSD as my boot drive.  Since you said all of your SATA ports are currently in use.       

 
« Last Edit: April 28, 2017, 04:43:47 pm by shadowsports »
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

FlyAway

  • 16
  • 0
Re: GA-P55-UD4 have M.2 connector for SSD?
« Reply #16 on: April 28, 2017, 07:31:29 pm »
Ok, unfortunately you are right :)
Can you recommend a card with 2 SATA slots, possibly on Amazon? The one who kindly advised me lepiaf37 costs almost 50 euros :(

shadowsports

  • 2259
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: GA-P55-UD4 have M.2 connector for SSD?
« Reply #17 on: April 28, 2017, 08:14:09 pm »
Ok, unfortunately you are right :)
Can you recommend a card with 2 SATA slots, possibly on Amazon? The one who kindly advised me lepiaf37 costs almost 50 euros :(

Once again...  I want to bring the following to your attention. Only the x16 and x8 slots on the board have more than 1 PCIe lane available.  If you populate the x8 slot, it cuts the performance of your x16 (GPU) slot in half.

If you use a x1 SATA adapter card in a x1 slot, you have one lane for bandwidth.  If you connect only one disk, you will get 250-400mb/s.  If you connect 2 drives >- one lane = you will only get 1/2 this performance. 

This asmedia 1061 x1 card should work.  I would not connect my boot drive to this card.  The best performance would be if only one disk is connected. 

https://www.amazon.com/IO-Crest-Port-PCI-Express-SY-PEX40039/dp/B005B0A6ZS/ref=sr_1_2?ie=UTF8&qid=1493405575&sr=8-2&keywords=pcie+x1+sata+card

At this point you are stretching the resources available on this platform to the extreme.  Good luck with your upgrade.
« Last Edit: April 28, 2017, 08:19:04 pm by shadowsports »
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

FlyAway

  • 16
  • 0
Re: GA-P55-UD4 have M.2 connector for SSD?
« Reply #18 on: April 28, 2017, 08:44:39 pm »
ok, perfect, I order it. Last help pleaseeeeee. You can suggest an HD SSD to associate, 120gb max 100 euro. I promise I will not bother you anymore :)
« Last Edit: April 28, 2017, 08:46:05 pm by FlyAway »

shadowsports

  • 2259
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: GA-P55-UD4 have M.2 connector for SSD?
« Reply #19 on: April 28, 2017, 11:08:43 pm »
I already made that suggestion above. 850 evo/pro
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

FlyAway

  • 16
  • 0
Re: GA-P55-UD4 have M.2 connector for SSD?
« Reply #20 on: April 29, 2017, 09:59:26 am »
oh, I remember now...ok, thatks for all :)