X58A-UD3R REV 1.0 and (3x2GB) OCZ 6GB 1600 MHZ (OCZ3G1600LV6) ''Blue screen''

[anexiety]

Here pics btw for cpu socket.. I followed your steps and applied new thermal paste..

[anexiety]

if there is problem I think it should be in this red circle?

[Dark Mantis]

It does look a bit suspect. Can you take a better photo of that particular area with good lighting please.

[anexiety]

Sure  Dark     Here  you go.  I hope you can see better.   supposed to be a bent there?

[Dark Mantis]

No I think that they are all ok. Check the lands (the little pads underneath the CPU) and you should be able to see marks where the pins touch. See if they all look somewhere near the centres.

[anexiety]

These pics all I have.  and alrdy I was instaled cpu back.  but cpu was looking just good as far as I see.

[Dark Mantis]

The pictures are totally useless but I think the pins were alright anyway so no worries.

[anexiety]

   If everything looks fine where can we look now for problem ://

[Dark Mantis]

It might just be that the memory doesn't work well with the motherboard I'm afraid. I think that you are going to have to either change the memory for a different manufacturer or settle for running it at a slower speed/less modules.

[anexiety]

I found some viruses on my pc  spreated around usb hardisks  and blocking my virus programs and windows. registery errors 900+ ....  (I havent noticed before)  . installed clean windows but before cleared all use hardisk with another pc.  so right now it looks good.. we see soon I guess

[Dark Mantis]

Yes I would agree that the memory modules are working alright. Just so there is no misunderstanding though that doesn't necessarilly mean that they are compatible with this motherboard.

[anexiety]

Hey Mantis;

Yea you were right. they are not compatible. I can see now. Before I do something I want to ask  1 more thing;

I installed clean windows. everything was fine for  10-15  hours runnig on windows I didnt get any error. with settings  manually 1066 mhz  8-8-8-24  1.64V. Problem starting when I shut down computer for long hours.  I shut downed computer for 10 hours maybe came.came from work  Then pushed button  and again Blue screen at windows starting screen  Why I wont get any error while windows runing  but getting bsod at starting windows?  I just wanna know if this motherboard faulty or  Ram faulty   or PSU  faulty...?   First time having problem with installing new computer. This is really started  annoying me.

Also these 1600 mhz dominator rams...  Do I have to set manually  rams,timings etc   if I buy them? or profile thing will gonna work?  I dont wanna deal with manuel settings anymore  which is I shoudnt have to be?..   Thanks  and have a good day

[Dark Mantis]

Hi

You should be able to just set the XMP in  the BIOS to Profile 1 and it should automatically set the timings and voltage for the RAM if you buy the Corsair Dominators.

I am afraid I cannot say with any level of confidence whythe computer Blue Screens on startup as opposed to when running normally. Maybe it is an issue that works better once warm?

[anexiety]

My cpu  i7 960  3.20 ghz  without OC and with stock fan (New cooler isnt arrived yet) +  case : thermaltake g elements with 4 fans.   while runing prime95   1024 m    cpu temps going  70C  around  and    cpu idle:45-52C         these tempurates ok  for a  i7 cpu?

[Dark Mantis]

I would say they are about what you would expect from your system with a stock cooler. A better cooler like a Noctua  or similar would probably shave off about 20C.