Official GIGABYTE Forum

ga-h55m-ud2h onboard firewire not recognised

ga-h55m-ud2h onboard firewire not recognised
« on: May 19, 2011, 05:04:20 pm »
Hi, I've had a look about and found nothing on this.  Wonder if anyone can assist.

I've got a GA-H55M-UD2H, which comes with an onboard TI firewire chip (one of the main reasons I got the board).  I've got windows up and running, but the firewire is not coming up in device manager.  I've tried downloading the TI driveers from their website (that forwards to unibrain and I got them from there)  but trynig to install them tells me 'Setup detected no 1394 adapters on your system'.

This machine is the hub of my recording studio, and I use MOTU 896HD firewire gear to run everything through, so as you can imagine I am in fairly urgent need of a fix!

Hope someone can help,
Chris

geekyadz

  • 197
  • 14
  • In the land of the geeks
Re: ga-h55m-ud2h onboard firewire not recognised
« Reply #1 on: May 19, 2011, 06:14:54 pm »
Disabled in the BIOS?
Nothing to see here, move along....

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: ga-h55m-ud2h onboard firewire not recognised
« Reply #2 on: May 19, 2011, 06:15:36 pm »
Hi and welcome to the Gigabyte Forum.

I had heard a rumour that there was sombody who used this Firewire connection and now I have found it is indeed true!  ;D ;D

Seriously when you go into Device Manager is there any icon with an exclamation mark or unknown device marked against it ?

Have you installed all the chipset drivers for the motherboard ?

If you would like to list your OS and the revision of your motherboard I will try and help more.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: ga-h55m-ud2h onboard firewire not recognised
« Reply #3 on: May 19, 2011, 06:50:40 pm »
Hi and welcome to the Gigabyte Forum.

I had heard a rumour that there was sombody who used this Firewire connection and now I have found it is indeed true!  ;D ;D

Seriously when you go into Device Manager is there any icon with an exclamation mark or unknown device marked against it ?

Have you installed all the chipset drivers for the motherboard ?

If you would like to list your OS and the revision of your motherboard I will try and help more.

No icon, no exclamation mark.  I installed everything that come on the CD.  Its rev1.3 and I'm on windows 7 64bit.

Is it possible that there is an option in the bios that controls this?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: ga-h55m-ud2h onboard firewire not recognised
« Reply #4 on: May 19, 2011, 08:52:42 pm »
Have you checked to see if it is disabled in the BIOS like cchaos suggested ?
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: ga-h55m-ud2h onboard firewire not recognised
« Reply #5 on: May 24, 2011, 03:53:41 pm »
Having trouble getting into bios since my keyboard and mouse are wireless USB and don't seem to start working till the computer has been on 30 seconds or so.  I'll have to dig out an old purple/green keyboard and mouse from somewhere.  If there is an option in bios for this then there is a good chance it might be turned off.  Makes sense given the rest of the board works fine.

Will report back with results.

F5BJR

  • 478
  • 31
Re: ga-h55m-ud2h onboard firewire not recognised
« Reply #6 on: May 24, 2011, 10:04:32 pm »
*
Not use UNIBRAIN drivers but original drivers delivered by GigaByte

Pierre

GA-X58A-UD5 I7 930
6x2Go KINGSTON 9905403-084
ENERMAX Modu 82+
Sharkoon REBEL12
2*HD5770SingleSlot+PCI-HD4350
2xSENSY 26'
2xBOX 5HD HotPlug
3xBOX 34HD MaxinPower
2x AD4SR5HPMU Addonics 8x1ToWDGreen 
4x 1TO RAID10 ICH10+1 BACKUP OS
2 * RR622 HighPoint
Sata 88SX7042  
AverMedia H727

Re: ga-h55m-ud2h onboard firewire not recognised
« Reply #7 on: May 24, 2011, 11:43:44 pm »
*
Not use UNIBRAIN drivers but original drivers delivered by GigaByte

Pierre



There are no firewire drivers on the disc or the downloads page for this motherboard.

F5BJR

  • 478
  • 31
Re: ga-h55m-ud2h onboard firewire not recognised
« Reply #8 on: May 25, 2011, 12:03:06 am »
*
Oh yes sorry for the bad infos ...

Finally i have look my computer and drivers is embedded in Microsoft Windows

You can use UNIBRAIN drivers but i have found many BSOD at the installation and because i have my RAID in reconstruction i use not

Pierre

GA-X58A-UD5 I7 930
6x2Go KINGSTON 9905403-084
ENERMAX Modu 82+
Sharkoon REBEL12
2*HD5770SingleSlot+PCI-HD4350
2xSENSY 26'
2xBOX 5HD HotPlug
3xBOX 34HD MaxinPower
2x AD4SR5HPMU Addonics 8x1ToWDGreen 
4x 1TO RAID10 ICH10+1 BACKUP OS
2 * RR622 HighPoint
Sata 88SX7042  
AverMedia H727

Re: ga-h55m-ud2h onboard firewire not recognised
« Reply #9 on: May 25, 2011, 06:18:57 pm »
*
Oh yes sorry for the bad infos ...

Finally i have look my computer and drivers is embedded in Microsoft Windows

You can use UNIBRAIN drivers but i have found many BSOD at the installation and because i have my RAID in reconstruction i use not

Pierre



I was only using them to try and re trigger the firewire... maybe recognize it installing a driver, since the ones it should have run automatically from windows and I can't 'run' them.

Right, I've got a non usb keyboard, gone into bio, and cant find anything that would turn firewire on or off.
« Last Edit: May 25, 2011, 06:26:34 pm by christraverse »

F5BJR

  • 478
  • 31
Re: ga-h55m-ud2h onboard firewire not recognised
« Reply #10 on: May 25, 2011, 09:21:28 pm »
*
If your card is as my GA-X58A-UD5 i have not option for un/validate the FireWire port

Possible is that the driver is locked after install the UniBrain driver

Solution is to search the value in config panel --> network cards  and also 1394  must exist

If you have not the 1394 you have a problem

Start Regedit : search value V1394\NIC1394 .. remove the key if exist , reboot / power off

If good , after reboot you can find a new valid 1394 card

Pierre

GA-X58A-UD5 I7 930
6x2Go KINGSTON 9905403-084
ENERMAX Modu 82+
Sharkoon REBEL12
2*HD5770SingleSlot+PCI-HD4350
2xSENSY 26'
2xBOX 5HD HotPlug
3xBOX 34HD MaxinPower
2x AD4SR5HPMU Addonics 8x1ToWDGreen 
4x 1TO RAID10 ICH10+1 BACKUP OS
2 * RR622 HighPoint
Sata 88SX7042  
AverMedia H727