gigabyte X58A-UD3R cold boot

[manowargr]

error i had bsod with those settings im sure the bsod waz because i left on auto the qpi ram voltage. now i set it to 1.35. i will post back with more news.

any help would be great.

John.

[F5BJR]

*
Have you tested with the defaults BIOS parameters ?

Run fine , low power / temperature for memory sticks ( for me 40 ° but with XMP 60° !! )

Pierre

[manowargr]

Hello Pierre, yes i have try its all ok with default settings, and yes lower temp without xmp

*
what performance enhance to choose? standard, turbo, extreme ?

*

and something else, every time that i change an option for example voltage i must load optimized default clear cmos then restart and then configure them all again? or not and just change somethink/save and exit.

John.

[manowargr]

Hello again, i overclock my system to 4ghz it seems stable, one friend of mine told me the settings Dark can you check if is ok?
i want to try with lower voltage maybe will work i dont know..


Advanced CPU Features:
CPU Clock Ratio ................................ [20]
Intel(R) Turbo Boost Tech ................. [Enable]
CPU Cores Enabled .......................... [All]
CPU Multi Threading ..........................[Enable]
CPU Enhanced Halt (C1E) ................. [Disable]
C3/C6/C7 State Support ................... [Disable]
CPU Thermal Monitor ........................ [Disable]
CPU EIST Function ............................ [Disable]
Virtualization Technology ................. [Disable]
Bi-Directional PROCHOT .................... [Disable]

Uncore & QPI Features:

QPI Link Speed ..............................[x36]
Uncore Frequency ..........................[x17]


Standard Clock Control:
Base Clock (BCLK) Control .................. [Enable]
BCLK Frequency (MHz) .........................[200]
PCI Express Frequency (MHz) ............. [100]
C.I.A.2........................................... ....... [-]

Advanced Clock Control:
CPU Clock Drive ..............................[800]
PCI Express Clock Drive ................ [900]
CPU Clock Skew ............................

IOH Clock Skew .............................

Advanced DRAM Features:
Performance Enhance .......................... [Standard]
Extreme Memory Profile (X.M.P) ........... [Disable]
System Memory Multiplier (SPD) ........... [ 8]
DRAM Timing Selectable (SPD) ............. [Quick]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##  First try these " relaxed " timings , if it is stable you can try the 7-8-7-20 timings your memory is rated at
CAS Latency Time ..................[8]
tRCD ......................................[8]
tRP ........................................[8]
tRAS ......................................[24]
CR..........................................[1]
B2B........................................[-]


Advanced Voltage Control:

Load Line Calibration .................... Level 2]
CPU Vcore ......................................[1.325]
QPI/VTT Voltage 1.150v .................[1.42]
CPU PLL 1.800v ..............................[1.80]
PCIE 1.500v ...................................[1.56]
QPI PLL 1.100v ..............................[1.24]
IOH Core 1.100v ............................[1.22]
ICH I/O 1.500v ...............................[1.58]
ICH Core 1.1v ................................[1.2]

DRAM
DRAM Voltage 1.500v .............. [1.66]
DRAM Termination 0.750v.......... [Normal]
Ch-A Data VRef. 0.750v ...........[Normal]
Ch-B Data VRef. 0.750v ...........[Normal]
Ch-C Data VRef. 0.750v ...........[Normal]
Ch-A Address VRef. 0.750v ........[Normal]
Ch-B Address VRef. 0.750v ........[Normal]
Ch-C Address VRef. 0.750v ........[Normal]

[Dark Mantis]

On the face of it they look ok to me. I would probably not have the Turbo enabled but it is a matter of choice.