GA-MA790FXT-UD5P(rev. 1.0) DMI update on every boot

[badpix3l]

Hi,
I have BIOS version F6, every time on boot BIOS write "AMD Data Change...Update New Data to DMI!!...Update Successful" I try reflash BIOS and message is still here. Any Sugestion or something? Why every time DMI data change, and update? I try F5 bios, still same. Pc work normal, no problem.

My PC:
VGA Brand : Nvidia      Model : GTX260
CPU Brand : AMD      Model : X2 955      Speed : 3200
Operation System : Vista 64-bit
Memory Brand : Crucial      Type : DDR3
Memory Size : 8gb      Speed : 1333
Power Supply : 600w W
Phenom 2 955 3.2ghz
4x2 GB DDR3
1 SATA HDD
1 SATA DVD-RW
1 Sound Blaster gamer

I try disconect HDD, DVD, remove 3 memory stick and all again he update DMI.
P.S. I update bios with Q-flash and usb stick.

[oggmonster]

Try clearing the CMOS and see if that helps

[Pottypete]

Hi
It seems  to  be written back to processor when PC wakes up from sleep mode of S3(STR).
from what info i've read,
Have you tried disabling S3,
Cheers

[badpix3l]

I try clean CMOS, and try disabled S3. I think i try all. Maybe is something with Q-flash? Any other have similar problem?

[oggmonster]

Have you tried loading fail safe defaults? What about disabling all power saving features. Do you have a spare graphics card you can try? If your system is running stable and are having no problems I would be temped to ignore it, looks like more of an annoyance than a problem.

[badpix3l]

Yep, system run rock stable. I will try other VGA just to check

[runn3R]

Hi badpix3l

Bios F7 is available, why not give it a try?
http://www.giga-byte.co.uk/Support/Motherboard/BIOS_DownloadFile.aspx?FileType=BIOS&FileID=15126

Also I found such suggestion:
Load optimized defaults in BIOS -> enter Q-Flash -> Reset DMI data and reboot -> on reboot enter bios, do not let OS load -> enter Q-Flash -> Reset DMI data > Load CMOS Default -> Reboot

[oggmonster]

Yeah the BIOS update should help as the F7 says "Update CPU ID (Support AGESA 3.5.3.1 code / AM3 C3 CPU) " Let us know how you get on

[badpix3l]

Also I found such suggestion:
Load optimized defaults in BIOS -> enter Q-Flash -> Reset DMI data and reboot -> on reboot enter bios, do not let OS load -> enter Q-Flash -> Reset DMI data > Load CMOS Default -> Reboot

I upgrade bios on F7.
I try this with "reset DMI data" but same.

[badpix3l]

I read od other forum " http://csd.dficlub.org/forum/showthread.php?t=10862 " some DFI board with 790 chipset do same. Maybe is normal 
 

[oggmonster]

Yeah if you've done everything we've suggested + your system is perfectly stable, I would not worry about it 

[j_v]

i have the same mb and makes the same,update DMI in every boot. i have use a dfi 790fx and makes the same. Maybe is not problem. My system is stable in benchmarks,stability test,games,etc.

[runn3R]

Hi All

I confirmed it with our HQ, there is nothing to worry about. The explanation is as follows:
The message means that data of the memory registry of K8 processor has been updated to DMI when the system is turned on. Those data are aimed to be written back to processor when PC wakes up from sleep mode of S3(STR).

Anyway a special bios will be made soon without this message (as it maybe confusing)
 

[badpix3l]

Ok, tnx very much 

[runn3R]

Hi badpix3l

This special bios should fix the issue, please try it and feedback