Gigabyte P67A-AD4-B3 (rev 1,1) ram problems =(

[Aussie Allan]

 Ideally Yes!...........this will give you the least problems and highest performance for a given brand and model.......what drives did you have in mind ....I may be able to help you here with Quality verses price/longevity

  Aussie Allan

[mrfalk]

was just some random 250gb sata disk i had laying around thats all dont know brand and rpm on them since im at work atm but ill get you the info when i get home  thx for the answear anyway 

[Aussie Allan]

    While you're busy WORKING!  my suggestion for exceptional bang for buck was Samsung spinpoints ....F3 HD502HJ.....this is a 500Gb model....7200rpm....NCQ.....16Mb Cache.....these can be had for as little as 16.5 Engish Pence per GB (about 30 Pounds each)   ...  Scan, Aria, Ebuyer

  The real gem is they outperform about 50/60% of Sata3 drive on the market today..........I have 4 of these in Raid0 for my Photo storage ....545Mb/s read and 525Mb/s write...........be warned..........once you start to enjoy this level of drive speed/access.......you'll never go back...

                                                ENJOY!

  Aussie Allan

[Dark Mantis]

The 1TB version of the F3 is another very good drive and also at a good price. I guess it all depends on how much storage you really need.

[mrfalk]

well im more after the performence and not the storage since im going to go with one 128gb ssd for operating system and 250x2 for storage i was thinking for games/video/music etc and i heard that Raid 0 on the 250 would increase read/write performence??

maybe its possible to make Raid from 1x128gb ssd and 2x250gb hdd ? or is that not possible or will it just give me a headache and more problems to fight with ??

[Dark Mantis]

Even if you did manage to do it you wouldn't be gaining anything as the SSD is much faster already than your other drives.  The way you had it planned is fine in my opinion.

[mrfalk]

oh kk i go for what i first was planing then thx DM

but im going to wait untile i get the new power supply before i start to experiment with that since my system is unstable and twicy as it is

put im planing ahead thats just how i am

can i ask something ells? it is possible to run 4 screen from on single 6970 right or do i need to get another card and crossfire ?

i read on there homepage that it supports up tp 6 screen but dident rly find or get if you needed another GPU for that ?

any one tryed this out or have som info about it ?

maybe we should change topic to Gigabyte  P67A-UD4-B3 (rev 1,1) system unstability problems

and anyone know any good watercooling site for learning and building a nice and sweet system?

[Dark Mantis]

There are certain Radeons that will support up to six screens at once from one card but it is only a couple of models as far as I am aware. The rest will output to a maximum of three displays.

[mrfalk]

okey now i got my new PSU and im very impressed.. i connected everything to the computer all Fan,Screens,HHD,Usb devices, the whole sheee bang.....

BUT the Ram Problem Remains windows keep freezing and mouse/keyboard goes offf when all 4 rams ar inserted to the M/B

Rams Okey with Memtest86
PSU Okey.


so what left now change motherboard ? or can it be some kind off voltage problem in Bios maybe ?

[Aussie Allan]

  Well now we have good clean power that a start.....Awesome PSU , aren't they........This is one of the longer posts Ive been involved in ....so I reread the whole lot to refresh the memory.

  The way I see it either you have a bad memory slot .......or a memory compatibility issue with the Adata Dimms...........I don't know what it's like in your country but over here Adata just does not have a very good reputation ....compatibility being number one.........which make me think the memory more likely.

  This is the hard part!...........the only way we can rule out a compatibility issue is to find, beg ,borrow , steal a set of another manufacturer's memory to test in the board

  Preferably something tried and tested, corsair, Mushkin, G.skill .... there's not many memory's I can't find any information on......this is what worries me as I can't find diddlie squat on those numbers you supplied .... what do you think?

  Aussie Allan

[mrfalk]

Well i was thinking off the borrow some other Rams Aswell but problem i dont have anyone to steal the from so its ether buy new ones and take the chance on that the once i have aint compatible with the board but its a excpensive chance

i got some screen on the rams for you if it helps

strange thing is that bios cant even auto detect the CL on them the bios puts them top 9-9-9-24 when they should be 8-8-8-24 i mean that have to prove something aint as it should be ?

or is it just me.......'

pic's

[Aussie Allan]

  Not sure if you used a Etailer or Retailer..... either way, it's worth a shot approaching them and explaining the sager your have and the real possibility of non compatibility with the memory they supplied and can they help out somehow..... with a lend of anything to test out or a swap with a different brand,similar price...........you might be surprised......got to be worth a shot anyway!

  Aussie Allan   

[mrfalk]

So you dont think the Bios has any effect on it ?

[Aussie Allan]

So you dont think the Bios has any effect on it ?

 

  Possible ....but unlikely!......... you can put it to the test by dropping back a peg (Bios) and retest ........then go back another and try again.......how far can you go back ? .... you have nothing to loose and it costs nothing

  Aussie Allan

[mrfalk]

how do you mean now go back a peg ? you mean version or im confussed and frustrated ^^

dont feel right that you have to but more money in to something that you all rdy payed to much for

got no hair left soon

im going to Reinstall windows this week and check if it can be a corrupted install or something like that since computer fails inside windows and not in bios or memtest86

so well see what happens 6gb works for now i guess

*some eye Candy*

this is how my setup look like