GIGABYTE latest / beta BIOS for Intel CPU motherboards

[ex58]

New BIOS  on TT forum:

GA-Z77X-UD5H - F8a

[ex58]

New BIOS  on TT forum:

G1.Sniper 3 - F6a
GA-Z77-D3H - F13a

GA-H61M-D2H-USB3 - F5

[ex58]

New BIOS  on TT forum:

GA-Z77X-UD5H - F7b

[dev013]

What time will the new BIOS for Z68AP-D3 rev.2 for 3570K with OC?

[ex58]

New BIOS  on TT forum:

G1.Assassin 2 - F11c
GA-X79-UD7 - F11f
GA-X79-UD3 - F11c

- 10.May 2012

G1.Sniper M3 - F6
GA-Z77X-UD3H - F9
GA-Z77X-D3H - F8
GA-Z77-D3H - F13
GA-Z77M-D3H - F7

- 11.May 2012

[runn3R]

What time will the new BIOS for Z68AP-D3 rev.2 for 3570K with OC?

Try this UA4 bios and feedback if it works

[ex58]

Ooooo.....AMI BIOS  
 But show for Z68P-DS3.

Any more ?

[runn3R]

I will check

[ex58]

And BIOS file itself also.

[ex58]

New BIOS  on GB web page:

GA-Z77X-UD5H - F7

[dev013]

What time will the new BIOS for Z68AP-D3 rev.2 for 3570K with OC?

Try this UA4 bios and feedback if it works

This BIOS don`t work. Wright "Missing Checksum"

[ex58]

This BIOS don`t work. Wright "Missing Checksum"

Hi dev013,

as noted above,I suspect that BIOS is not for your board.

So,I try to make modified same BIOS Ua4 for your board ( Z68AP-D3 rev.2 ):
http://www.mediafire.com/?4g5d463do9xtfc2

If you successfully flashed,BIOS,CPU-Z,ET6 and another software will show Z68P-DS3 Rev 2.0,
so next new BIOS for your board will correct this.

Edit:
You MUST use FLASHEFI included in the file and type proper commands in DOS with Bootable USB Flash Drive to flash.
May need to use /Z or /X switches still, sometimes had to use with SPIFlash (Letter case matters too, so may need to try /Z or /z, ect).
http://forums.tweaktown.com/gigabyte/27576-bios-flashing-how-qflash-guide.html

This special FLASHEFI is for all Z68 motherboards,to be flashed with AMI BIOS,as all will get new BIOS ID code.
Good luck!

[kangoo]

This BIOS don`t work. Wright "Missing Checksum"

What utility do you use to do upgrade? I suspect you must use FLASHEFI as stasio mentioned as it is included in the compressed file.

So,I try to make modified same BIOS Ua4 for your board ( Z68AP-D3 rev.2 ):
http://www.mediafire.com/?4g5d463do9xtfc2

what have you changed?

If you successfully flashed,BIOS,CPU-Z,ET6 and another software will show Z68P-DS3 Rev 2.0,
so next new BIOS for your board will correct this.

what a mess!! why different MB version will be shown? i don't understand - it never happened before that after bios upgrade you "get" different model name shown on screen

[ex58]

 

[runn3R]

This BIOS don`t work. Wright "Missing Checksum"

Hi dev013 and kangoo

Sorry for the problem. The bios file for Z68AP-D3 Rev.2.0 has been just updated, it's the same version and link as before. Please try again and remember to use FlashEFI under DOS like stasio described.