GA-EX58A-UD5 2xSSD Raid0 in Marvell, Other 3HDDs in ATA (ICH10R) is it possible?

[alexxx]

I would like to know before I buy new SSD and set it in RAID0, and other HARD drives who are connected in INTEL Controller in ATA Mode to-not-be removed. Can DO?
tnx

[Gloup_Gloup]

Hi alexxx, 

The best, it is install the SSD on ICH10R Sata Port.
The same things for HD Sata.

The Marvell GSata is slow and sometimes cause a little problem.

Gloup_Gloup

[alexxx]

:O I get it

but my motherboard has 10 SataII ports by INTEL Controller and other 2 SataIII by Marvell. that what I want is: 2xSSD in RAID0 mode and other 3 HDD in IDE mode, can it work?
 

[Gloup_Gloup]

:O I get it

but my motherboard has 10 SataII ports by INTEL Controller and other 2 SataIII by Marvell. that what I want is: 2xSSD in RAID0 mode and other 3 HDD in IDE mode, can it work?
 

Hi alexxx, 

You said, I reformulate : You  have a 3 hard disk IDE ?  OR you have 3 Hard Disk SATA (type 2 or 3 ) and you want it in BIOS, parameter IDE Mode in Onboard SATA-IDE Ctrl Mode?

Gloup_Gloup

[alexxx]

for now I have 3 SATAII hard drives and 1 SSD III allone are under IDE Mode connected(there is no other way because they are different by size and by manufacter), now I want to buy one other SSD and set it in RAID0 with the oder SSD. I am not sure about the other drives, because in the Bios shall I chose RAID, If I set Raid Stripe to get the 2 SSD´s in RAID0, what will happen with ther oder 3 HDDs, because for RAID0 needs 2 identical drives. Will they be recognized after launching the Windows?

[Gloup_Gloup]

Hi alexxx,

Now your situation is more clear. Good.

But I prefer then other member reply about your question.
Be patient. Another member come here... for help you. 

Maybe just tomorrow... but sometimes check tonight.

In waiting time , use a Search TAB in forum Menu for find partial infos about your situation.
Why not?

Gloup_Gloup