Official GIGABYTE Forum

"Loading Operating System" Message

"Loading Operating System" Message
« on: August 10, 2012, 02:06:45 pm »
Ok, So I've had my Gigabyte motherboard for little over 5 months now and that infernal message is driving me crazy.
The boot splashscreen and the POST screens I can live with, they only flash up for mere milliseconds or 1 second at most.

Does anyone, anywhere know how to get rid of that "Loading Operating System" message, it slows my boot time by a good 5-7 seconds)

My Spec is as follows:

OS: Windows 7 Home Premium 64bit SP1
RAM: Corsair Vengeance 1600MHz 2x4GB
CPU: AMD Phenom ii x4 965 @ 3.4GHz
GPU: AMD Radeon HD 6670 1GB DirectCU Silent
SSD: OCZ Agility 3 60GB (Boot Drive)
HDD: 500GB Samsung SATA 2 (Program's & Games)
HDD: 160GB Hitachi SATA 2 (Web Development)
MOBO: GIGABYTE GA-970A-UD3 Rev 1.0 (BIOS F4)
PSU: OCZ 600W ModXStream Pro Modular

Its a completely fresh installtion of Windows 7 so I KNOW there are no virus's, rootkits or anything else for that matter, just plain and simple Operating system and antivirus. (I installed the OS onto the SSD yesterday)


If anyone has any ideas please feel free to share them.

Thank you.

NaviShann.
« Last Edit: August 10, 2012, 02:07:24 pm by NaviShann »

autotech

  • 1553
  • 35
Re: "Loading Operating System" Message
« Reply #1 on: August 11, 2012, 03:55:26 am »
Welcome to the gigabyte forums. Just so you dont feel alone ever since i installed my 240 gig SSD i have gotten that message. So will keep a watch on this post also.
GA-Z170X-UD5,Core i5-6600K,16 GIG,3200 ram ,2 X Corsair 240GB SATA III SSD, 500 gig HD,7 ult 64\, Rx-480 8gig\

Z97X-SOC GIGABYTE, I5 4670k, 16 gig 1600 ram, 240 gig sata3 SSD,1x 500HD/ R9 280x, corsair 650 RM PSU

GA-Z97X-Gaming G1,850 corsair,,DDR4 3200,240SSd,6950 video,850EVA

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: "Loading Operating System" Message
« Reply #2 on: August 11, 2012, 09:45:30 am »
Hi and welcome,

The "Loading Operating System" message is just a standard message in my opinion. The  other Gigabyte splash screen can easilly be disabled by going into the BIOS and doing it from there. The POST screen is standard and you can't do anything to clear that.

It is possible to even get rid of the "Starting Windows" screen but you don't gain a lot from doing away with it.
« Last Edit: August 11, 2012, 09:47:07 am by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy