Official GIGABYTE Forum

Where to fill out RMA form?

Where to fill out RMA form?
« on: April 20, 2010, 05:31:35 pm »
Hey I bought a GA-790XT-USB3 for my friends new build.

This mobo came and it's missing the cover thing that goes over the AM3 socket. Here is a pic of what I mean.



Can I get one of these sent out or does the mobo need to be RMA'd? It's brand new, only a week old.

absic

  • *
  • 5814
  • 529
  • Never give up; Never surrender!
    • Bandcamp
Re: Where to fill out RMA form?
« Reply #1 on: April 21, 2010, 07:04:56 am »
Hi,

If you don't want to RMA the board and just need to get hold of a CPU retention bracket, try sending a PM to runn3r: http://forum.giga-byte.co.uk/index.php?action=pm;sa=send;u=13

or check this link: http://forum.giga-byte.co.uk/index.php/topic,1566.0.html as someone else needed to get hold of a replacement bracket.

If that fails, contact me by PM as I have one that I could send you.

ATB
Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.

Re: Where to fill out RMA form?
« Reply #2 on: April 21, 2010, 03:48:42 pm »
The mobo will work then if I just put one on yes? If all it needs is one of them to work, I'll try get one sent out then, no need for an RMA since the board is new, and should work.

Thanks  btw :)

absic

  • *
  • 5814
  • 529
  • Never give up; Never surrender!
    • Bandcamp
Re: Where to fill out RMA form?
« Reply #3 on: April 21, 2010, 04:02:32 pm »
Hey,

Sorry I didn't read your post properly this morning..... (lack of coffee)

As the board is new you should contact the shop/on-line retailer where you bought it from and get it replaced. I wouldn't trust a "New" board that had something like this missing.
Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.

 

anything