Official GIGABYTE Forum
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. gigabyte ud3r x58a rev.2.0
« previous next »
Pages: 1 [2] 3   Go Down

gigabyte ud3r x58a rev.2.0

Johnz-

  • 112
  • 1
Re: gigabyte ud3r x58a rev.2.0
« Reply #15 on: March 21, 2011, 08:29:07 am »
can you reply here dm i must start today making the pc :)
Logged

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: gigabyte ud3r x58a rev.2.0
« Reply #16 on: March 21, 2011, 12:48:34 pm »
Quote from: Johnz- on March 20, 2011, 08:45:16 pm
Audio, Chipset, Realtek LAN Driver, from the sata raid section(only Intel SATA RAID Driver, i dont need sata 2 drivers right?) and i dont need usb 3 i have it disable from the bios i dont need it, i working with usb 2, and gsata ports usb.

i need somethink else?

If you disable the USB3 in the BIOS you realise that you will lose the use of those ports also ?

Apart from that you should be fine. ;)
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Johnz-

  • 112
  • 1
Re: gigabyte ud3r x58a rev.2.0
« Reply #17 on: March 21, 2011, 01:13:31 pm »
i didnt know that, thats why i want some more info :)
Logged

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: gigabyte ud3r x58a rev.2.0
« Reply #18 on: March 21, 2011, 01:15:40 pm »
No problem! If you want to use those ports but don't need the USB3.0 capability then just leave them enabled but don't load the USB3.0 drivers and you will be able to use them as normal USB2.0 ports.
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Johnz-

  • 112
  • 1
Re: gigabyte ud3r x58a rev.2.0
« Reply #19 on: March 21, 2011, 06:15:13 pm »
without drivers usb 3 dont work, maybe i need enable usb mouse legacy ?
Logged

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: gigabyte ud3r x58a rev.2.0
« Reply #20 on: March 21, 2011, 08:01:47 pm »
The USB3.0 ports should work but only at USB2.0 speed. You only need to enable USB Legacy support in the BIOS to be able to use the mouse or keyboard if they are USB  before Windows loads the drivers for them.
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Wonderwrench

  • 162
  • 8
Re: gigabyte ud3r x58a rev.2.0
« Reply #21 on: March 22, 2011, 01:02:47 am »
Quote from: Dark Mantis on March 21, 2011, 08:01:47 pm
The USB3.0 ports should work but only at USB2.0 speed. You only need to enable USB Legacy support in the BIOS to be able to use the mouse or keyboard if they are USB  before Windows loads the drivers for them.

I would think the NEC USB 3 drivers would need to be installed to use the ports at all. No driver no ports.

Bill
Logged
Main Box*i7 930@3.5 Ghz*CM V6 GT*GA X58A-UD3R v2 FB bios*3x4 gig Patriot DDR3 1600 EL*EVGA GTX 460 1 gig*OCZ Vertex 3 MI 120 gig*WD  Blue 500 gig*ASUS DRW-24B3LT*Samsung SH-S223L*Teac Floppy*Corsair AX750*Rosewill R6AR6-BK case*Windows 7 Ultimate 64 bit SP1

Johnz-

  • 112
  • 1
Re: gigabyte ud3r x58a rev.2.0
« Reply #22 on: March 22, 2011, 02:13:44 am »
i agree with bill, without drivers usb 3 ports dosnt work... with my microsoft mouse 1.1 optical. its old maybe its 1.1 usb . maybe is for that reason.
Logged

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: gigabyte ud3r x58a rev.2.0
« Reply #23 on: March 22, 2011, 03:34:16 pm »
Possibly you are correct, I will have to try it without drivers and see if it is still available. I will test and post back later.
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Johnz-

  • 112
  • 1
Re: gigabyte ud3r x58a rev.2.0
« Reply #24 on: March 26, 2011, 01:31:51 am »
DM you didnt reply :)
Logged

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: gigabyte ud3r x58a rev.2.0
« Reply #25 on: March 26, 2011, 08:33:31 am »
No I am sorry but i have been terribly busy this past week and I haven't had time to test. I will do though and reply. :-[
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Johnz-

  • 112
  • 1
Re: gigabyte ud3r x58a rev.2.0
« Reply #26 on: March 26, 2011, 01:31:02 pm »
:) dont be sorry i just asked why you didnt reply yet hehe, no problem when you have time its nothink so important.
Logged

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: gigabyte ud3r x58a rev.2.0
« Reply #27 on: March 26, 2011, 01:57:58 pm »
OK! I have just reconfigured it without any of the Renesas USB3.0 drivers and the ports work fine as USB2.0. I even ran the setup with the USB controlled keyboard and mouse plugged into the USB3.0 port.

I didn't have anything that was 1.1 or older so couldn't test mwith that but there shouldn't be any difference as the standards are backwards compatible.

I must admit to not being sure myself after you had challenged me but it seems I was correct. ;)
« Last Edit: March 26, 2011, 02:00:44 pm by Dark Mantis »
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Johnz-

  • 112
  • 1
Re: gigabyte ud3r x58a rev.2.0
« Reply #28 on: March 27, 2011, 12:51:58 am »
officialy i dont have problem on my motherboard, as i said maybe your ud5 works and without driversand ud3 not, but i have test it only with 1.1 mouse on mine.
« Last Edit: March 27, 2011, 03:24:09 am by Johnz- »
Logged

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: gigabyte ud3r x58a rev.2.0
« Reply #29 on: March 27, 2011, 10:44:52 am »
I wouldn't have expected the ports to behave differently as the architecture is the same. Possibly it is down the the device installed. :-\
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy
Pages: 1 [2] 3   Go Up
« previous next »
  1. Official GIGABYTE Forum
  2. Questions about GIGABYTE products
  3. Motherboards with Intel processors
  4. gigabyte ud3r x58a rev.2.0