Official GIGABYTE Forum

How to properly set BIOS for clean Windows 10 UEFI install? [GA-B85M-D3H]

k3lt

  • 1
  • 0
I'm about to install Windows 10 x64 in UEFI mode for the first time..
How to properly configure following BIOS settings: "OS Type / Windows 8 Features" , "Secure Boot" "CSM Support" and "Storage Boot Option Control".

My motherboard is GA-B85M-D3H (BIOS F14) , system will be installed on SSD and the rest will reside on hdd.
Could anyone help, dont want to screw anything since i will be using UEFI installation for the first time..
« Last Edit: July 22, 2015, 04:14:53 pm by k3lt »

dmdilks

  • 3093
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Just go in and tell it to boot from the UEFI DVD.

Plus make sure you have the SSD sata Intel controller set AHCI.

The CSM supports is set enabled by default.

I myself would not run secure boot. But if you Microsoft looking over shoulder that is up to you.

You can just set it to windows 8 too.
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.