Questions about GIGABYTE products > Motherboards with Intel processors

Blank screen after enabling secure boot, any way to fix it?

<< < (2/4) > >>

chris_yooo:
more pictures 2

chris_yooo:
more pictures 3

chris_yooo:
more pictures 4

shadowsports:
Greetings,
All of the Z390 based boards share similar characteristics.

There is no need to use anything but the windows media creation tool to make your W10 install media.  Forget Rufus or any 3rd party apps, they aren't needed. 

The install media can be used to install windows on a MBR or GPT partition.  I recommend GPT, but MBR works too.

F12 during post allows you to select a one time boot menu

Incorrect BIOS setting can get you into trouble, but should not be significant enough to keep you from installing your OS.

Start by resetting the BIOS to defaults.  Then start over.

Do not enable Fast Boot, its not needed.

Set CSM Support [Disabled]

Secure Boot [Enabled]

SATA Mode Selection [Intel RST Premium With Intel Optane System Acceleration] 

Note: Boot Option Priorities
Specifies the overall boot order from the available devices. Removable storage devices that support GPT format will be prefixed with "UEFI:" string on the boot device list. To boot from an operating system that supports GPT partitioning, select the device prefixed with "UEFI:" string.  Or if you want to install an operating system that supports GPT partitioning such as Windows 10 64-bit, select the optical drive that contains the Windows 10 64-bit installation disk and is prefixed with "UEFI:" string. In your case, this will be a USB Stick

Those are the key items you need for UEFI install

Insert your W10 boot media to a USB slot.

Save BIOS settings and restart

Tap F12, select your USB stick as the boot device

Begin windows install

When you get to the select target disk

Shift+F10 for a command prompt

Type diskpart, then press enter

Type list disk, then press enter

Identify your target...

Type select disk [?] ? will be either 0 or 1, then press enter

Now it will tell you that disk is selected

Type clean, then press enter

Type convert GPT, then press enter

Type exit, then press enter or just close the window

Back at the windows install GUI, now select the disk you just cleaned and partitioned GPT as your install target

Windows install resumes from there.

6-7 minutes later you'll have W10.  Thats it.

chris_yooo:
Hey i hope that youve write down this Instructions into another Topic and you copy pasteded me this ^^

In first, thanks 4 that.

I tryed to explain my 50 times various installations without much text above -

My installation progress is exact your explaining. 2 little things, i disconnectet all other devices before i booted and my NVMe cleaned in advance.

As I said before after windows is done with its first progress, the PC reboots and then I am in the bios, none of the boot devices that can be selected work :S

Navigation

[0] Message Index

[#] Next page

[*] Previous page